Resetting The Lamp - ViewSonic PJ568D User Manual

Remove the two screws from the lamp
3.
module [A] and then lift the module
handle up [B].
Pull up firmly to remove the lamp module.
4.
Reverse Steps 1 to 4 to install the new
5.
lamp module.
Note: The lamp module should be oriented
as shown here when replacing.

Resetting the Lamp

After replacng the
Press the Menu button to open the
1.
Main menu.
Press the cursor  button to move
2.
to the Status menu.
Press the cursor  button to move
3.
to Lamp Hour Reset.
Press the Enter button.
4.
A message screen appears.
ViewSonic PJ588D/PJ568D/PJ508D
,
lamp reset the lamp hour
http://www.pureglare.com.au
.
counter to zero Refer
:
to the followng
32