Advertisement

EN
User Manual
HK674400FB
Hob

Advertisement

Table of Contents
loading

Summary of Contents for AEG HK674400FB

  • Page 1 User Manual HK674400FB...
  • Page 2: Table Of Contents

    10. ENERGY EFFICIENCY....................19 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
  • Page 4: Safety Instructions

    Do not store items on the cooking surfaces. • Metallic objects such as knives, forks, spoons and lids • should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance.
  • Page 5 ENGLISH • Make sure that a shock protection is • Do not let the appliance stay installed. unattended during operation. • Use the strain relief clamp on the • Set the cooking zone to “off” after cable. each use. • Make sure the mains cable or plug (if •...
  • Page 6: Product Description

    • Cookware made of cast iron, not use abrasive products, abrasive aluminium or with a damaged bottom cleaning pads, solvents or metal can cause scratches on the glass / objects. glass ceramic. Always lift these 2.5 Disposal objects up when you have to move them on the cooking surface.
  • Page 7: Control Panel Layout

    ENGLISH 3.2 Control panel layout To see the control panel activate the appliance with Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field STOP+GO To activate and deactivate the function. Bridge To activate and deactivate the function.
  • Page 8: Daily Use

    Display Description STOP+GO function operates. Automatic Heat Up function operates. Power function operates. There is a malfunction. + digit OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat. Lock / The Child Safety Device function operates.
  • Page 9: The Heat Setting

    ENGLISH The relation between the heat setting and the time after which the hob deactivates: Heat setting The hob deacti- vates after 6 hours , 1 - 3 4 - 7 5 hours 8 - 9 4 hours 10 - 14 1.5 hour 4.3 The heat setting Put the cookware on the cross / square...
  • Page 10: Power Function

    To deactivate the function: set the To activate the function the cooking zone with and touch . The cooking zone must be cold. remaining time counts back to 00. The To activate the function for a cooking indicator of the cooking zone goes out.
  • Page 11 ENGLISH 4.9 STOP+GO 4.12 OffSound Control (Deactivating and activating This function sets all cooking zones that the sounds) operate to the lowest heat setting. When the function operates, you cannot Deactivate the hob. Touch for 3 change the heat setting. seconds.
  • Page 12: Hints And Tips

    5. HINTS AND TIPS the minimum receives only a part of the WARNING! power generated by the cooking zone. Refer to Safety chapters. Refer to “Technical 5.1 Cookware information” chapter. For induction cooking zones 5.2 The noises during a strong electro-magnetic...
  • Page 13: Care And Cleaning

    ENGLISH the increase of the cooking zone The data in the table is for consumption of power. It means that the guidance only. cooking zone with the medium heat setting uses less than a half of its power. Heat setting Use to: Time Hints...
  • Page 14: Troubleshooting

    Clean the hob with a moist cloth and the blade on the surface. non-abrasive detergent. After • Remove when the hob is sufficiently cleaning, wipe the hob dry with a soft cool: limescale rings, water rings, fat cloth.
  • Page 15 ENGLISH Problem Possible cause Remedy The highest heat setting is The highest heat setting has set. the same power as the func- tion. The heat setting changes Power management function Refer to "Daily use" chapter. between two levels. operates. The sensor fields become The cookware is too large or Put large cookware on the hot.
  • Page 16: Installation

    Problem Possible cause Remedy There is an error in the hob Deactivate the hob. Remove comes on. because a cookware boils the hot cookware. After ap- dry. Automatic Switch Off proximately 30 seconds, acti- and the overheating protec- vate the zone again. If the tion for the zones operate.
  • Page 17 ENGLISH cable type: H05BB-F T min 90°C. Speak to your local Service Centre. 8.4 Assembly min. 500mm min. 50mm min. min. 2 mm min. 2 mm < 20 mm > 20 mm min. 500 mm min. 500 mm 30 mm 12 mm 57 mm 12 mm...
  • Page 18: Technical Information

    You can not use the protection box if you install the hob above an oven. 9. TECHNICAL INFORMATION 9.1 Rating plate Modell HK674400FB PNC 949 597 133 00 Typ 58 GAD CC AU 220 - 240 V 50 - 60 Hz Induction 7.4 kW Made in Germany Ser.Nr.
  • Page 19: Energy Efficiency

    Right 140 x 280 210 x 330 10. ENERGY EFFICIENCY 10.1 Product information according to EU 66/2014 Model identification HK674400FB Type of hob Built-In Hob Number of cooking zones Heating technology Induction Diameter of circular cook- Left front 21.0 cm...
  • Page 20: Environment Concerns

    • If it is possible, always put the lids on • Put the cookware directly in the the cookware. centre of the cooking zone. • Before you activate the cooking zone • Use the residual heat to keep the put the cookware on it.
  • Page 21 ENGLISH...
  • Page 22 www.aeg.com...
  • Page 23 ENGLISH...
  • Page 24 www.aeg.com/shop...

Table of Contents