Yamaha MT09 Owner's Manual page 68

Periodic maintenance and adjustment
1
2
3
4
5
1. Radiator cap
2. Radiator cap retaining bolt
3. Radiator cap retainer
6
4. Remove the coolant reservoir cov-
er and coolant reservoir by remov-
7
ing the bolts and collars.
8
9
10
11
12
2
1
3
1. Bolt
2. Coolant reservoir cover
3. Coolant reservoir
4. Collar
5. Remove the coolant reservoir cap.
1. Coolant reservoir cap
6. Drain the coolant from the coolant
reservoir by turning it upside down.
1
3
4
4
1
2
1
6-13
7. Install the coolant reservoir and its
cover by placing them in the origi-
nal position, and then installing the
collars and bolts.
8. Remove the coolant drain bolt and
its gasket to drain the coolant from
the cooling system.
1 2
1. Coolant drain bolt
2. Gasket
9. After the coolant is completely
drained, thoroughly flush the cool-
ing system with clean tap water.
10. Install the coolant drain bolt and its
new gasket, and then tighten the
bolt to the specified torque.
Tightening torque:
Coolant drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)