Yamaha FJR1300AS Owner's Manual page 63

With the engine turned off:
1. Place the vehicle on the centerstand.
2. Move the sidestand down.
3. Make sure that the start/engine stop switch is set to "
4. Turn the key to "ON".
5. Shift the transmission into the neutral position.
6. Keep the front or rear brake applied.
7. Push the " " side of the start/engine stop switch.
Does the engine start?
YES
With the engine still running:
8. Move the sidestand up.
9. Shift the transmission into gear.
10. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
11. Move the sidestand up.
12. Release the brake.
13. Push the " " side of the start/engine stop switch.
Does the engine start?
NO
The system is OK. The motorcycle can be ridden.
INSTRUMENT AND CONTROL FUNCTIONS
".
NO
NO
YES
3-48
WARNING
•
The vehicle must be placed on the center-
stand during this inspection.
•
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
TIP
The traction control system indicator/warning
light "TCS" may come on, but this is not a
malfunction.
The neutral switch, a brake light switch or the
YCC-S system may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
A brake light switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
3