Table of Contents
Advertisement
Australia Mars T5519,T5539,T5709,T5419 user guide
Pg 11
Belt Clip
Your radio comes with a swivel belt clip.
To attach, align belt clip post with hole
in the radio back and gently push until it
clicks into place.
To remove, push release tab on top of
belt clip down to release catch and pull
belt clip from the radio back.
TALKING AND LISTENING
Read this manual carefully before use.
Your radio has 38 channels. If you are in a group and you wish to
talk to each other, all radios must be set to the same channel
and interference eliminator code. If you experience
interference and need to change channel, ensure that you
change the channel and code of all radios in your group.
• For maximum clarity, hold radio 5 to 7 centimeters from mouth.
• Press and hold
and speak into the microphone. LED
indicator light glows continuously when transmitting.
• To receive messages, release
Volume
Use
to adjust your volume to a comfortable listening level.
Australia Mars T5519,T5539,T5709,T5419 user guide
Pg 12
Duplex Mode
The units support the use of repeater in Duplex mode or without
the use of repeater in Simplex mode. This Duplex mode is only
supported for Channel 1 to Channel 8. When in these channels,
press
or
button will trigger
between Duplex and Simplex mode.
For example,
in channel 1, duplex mode will display:
Simplex mode will display:
Time-out Timer
The Time-out Timer feature helps extend battery life by
preventing accidental transmission. The radio will emit a
continuous warning tone after
seconds and will stop transmitting.
Keypad Lock
The keypad lock disables the
disables the scan function, but allows you to use the
to monitor the channel. It also allows you to use the
buttons.
Press and hold the
button for three seconds to lock or
unlock the keypad. When the radio is locked
12
display.
Monitor
Pressing and holding
for activity.
Channel
• Press
• Use
• Press
Interference Eliminator Code
Interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
• Press
• Use
• Press
You can specify a different code for each channel.
• To set a channel and code combination, press
• Press
• Press
.
To set another channel and code combination, repeat these
steps.
Note: Channel 5 and 35 have no Interference Eliminator Code
is pressed for 60 continuous
,
and
buttons. It also
button
and
will show in the
allows you to monitor your channel
. The channel number will begin to flash.
or
to change channel.
to set new channel.
until the code number begins to flash.
or
to change the code.
to set new code.
press
or
to select the channel.
again and then press
to exit the menu and to save the channel and code
combination.
(CTCSS).
Scan (For T5519 and T5539 only)
By scanning, you can monitor channels and codes for
transmissions and lock in on the one that interests you. More
importantly, you can find someone in your group who has
accidentally changed channels and is talking during your scan.
• To start scanning, briefly press and release the
• If you activate scan while your code is set to 0, then the radio
will check for any activity on each channel, regardless of the
code in use on that channel.
• If you activate scan while the code is set on 1 to 38, the radio
will only check for activity on the specific channel and code
combinations that are set on your radio.
• While the radio is scanning,
scroll through the channels.
• When activity is detected on a channel, the radio will stop
scanning and you will hear whatever transmissions are
detected. The radio's display will show the channel and code
on which activity was detected.
• If you want to respond to the transmission, press
seconds and you can respond.
• The radio will resume scanning after 5 seconds of inactivity on
the channel.
• To stop scanning, briefly press and release
Scan Advance (For T5519 and T5539 only)
If scan stops on a channel that you don't want to listen to,
briefly press
or
to resume scanning for the next active
channel.
and then
or
to select a code.
11
button.
will display and the radio will
within 5
.
Hide quick links:
Advertisement
Table of Contents
