Yamaha KODIAK 700 YFM70KDXH Owner's Manual page 136

1
1. Tailpipe bolt
2. Remove the tailpipe by pulling it out of the
muffler, and then remove the gasket.
3. Tap the tailpipe lightly, and then use a wire
8
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
1
1
1. Gasket
2. Spark arrester
3. Tailpipe
4. Check the gasket for damage, and replace it
if necessary.
5. Make sure the gasket is properly positioned,
then insert the tailpipe into the muffler and
align the bolt holes.
6. Install the bolts and tighten them to the spec-
ified torque.
Tightening torque:
Tailpipe bolt:
10 N·m (1.0 kgf·m, 7.2 lb·ft)
8-40
2
3