Audio Drc - Pioneer DVR-630H-S Operating Instructions Manual

-530H_EU.book 97 ページ ２００５年２月１４日 月曜日 午後２時２０分
The Video/Audio Adjust menu
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level (NTSC video playback only).
• Gamma Correction – Adjusts the brightness of
darker images.
Chapter 13
• Hue – Adjusts overall balance between red and
green.
The Video/Audio Adjust menu
• Chroma Level – Adjusts how rich the colours
appear.
Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc
4 Use the
layback, and for recording.
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Setting the picture quality for TV and
external inputs
Tip
icture Creation lets you choose a set of picture quality
• To see more of the picture as you adjust different
ettings for the built-in TV tuner and for each external
settings, press ENTER after selecting the setting you
nput. There are several preset settings that suit various
want to adjust.
ources, or you can create up to three of your own sets.
Choosing a preset

Audio DRC

With the recorder stopped, press HOME MENU
• Default setting: Off
nd select 'Video/Audio Adjust'.
When watching Dolby Digital material at low volume, it's
easy to lose low level sounds completely—including
some of the dialog. Switching on Audio DRC (Dynamic
Range Control) can help by bringing up the low level
Disc Navigator
sounds, while controlling high level peaks.
GUIDE Plus+
Easy Timer
1 During playback or when paused, press HOME
Play Mode
MENU and select 'Video/Audio Adjust'.
Photo Viewer
2 Select 'Audio Adjust'.
Select 'Video Adjust'.
3 Use the
'Max'.
Use the buttons to change the preset.
Audio DRC
Audio DRC
Detailed Settings
Exactly how much difference you can hear between the
• Use the INPUT SELECT button to switch between the
settings will depend on the material.
built-in TV tuner and the external inputs.
• Use the CH +/– buttons to change the channel of the
Tip
built-in TV tuner.
here are six presets available:
• Audio DRC is not effective when listening to a disc via
the digital output when Dolby Digital Out is set to
• Tuner – suitable for general TV broadcasts
Dolby Digital. In this case adjust the dynamic range
• VCR – suitable for video cassettes
from your AV amplifier/receiver.
• LDP – suitable for Laserdiscs
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
Downloaded From Disc-Player.com Pioneer Manuals
Note
buttons to adjust the currently
Disc Setup
Initial Setup
Video/Audio Adjust
Copy
Jukebox
buttons to adjust DRC from 'Off' to
Pr 1
Off Max
Tuner
You can press DISPLAY to see the individual settings for
the current preset ( Tuner , VCR or LDP ).
4 Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Select 'Detailed Settings'.
Memory1
Detailed Settings
3 Use the buttons to select the picture quality
setting you want to adjust.
Memory1
Prog. Motion
PureCinma
YNR
CNR
Detail
White AGC
White Level
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually this is best left set to Auto ; try
switching to Off if the picture appears unnatural.
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
• Detail – Adjusts how sharp edges appear.
Pr 1
Pr 1
Motion Still
Auto1
Off Max
Max
Off
Min Max
Off
Min Max
1
13
En