Table of Contents
Advertisement
Problem solving guide
Most minor faults in the performance of the appliance, some of which may result
from incorrect operation, can be put right without contacting the Service Depart-
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably qual-
ified and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.
Technical problems
Problem
The display remains
dark after the dish-
washer has been
switched on with the
sensor.
The dishwasher stops
during a programme.
68
Cause and remedy
The appliance is not plugged in.
Insert the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
The mains fuse has tripped.
Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
If the mains fuse trips again, call the Miele Service
Department.
Advertisement
Table of Contents
