Roller Holder Assy - Brother HL-4040CN Service Manual

(5) Assemble the MP lift arm 2 with aligning it with the three Bosses provided on the Front
door unit ASSY.
Note:
When assembling the MP lift arm 2, make sure that the shaft of the MP roller holder ASSY
is put into the hole on the MP lift arm 2.
Shaft
(MP roller holder ASSY)
Bosses
Front door unit ASSY
(6) Assemble the MP feed frame cover onto the Front door unit ASSY.
(7) Close the Front door unit ASSY.
MP feed frame cover
(8) After replacing the MP paper feeding kit, reset the counter. (Refer to
Function" in this chapter.)
Fig. 2-56
Hooks
Hook
Fig. 2-57
2-31
Hole
MP lift arm 2
<Front side>
MP feed frame cover
Hook
<Front side>
Front door unit ASSY
"2.3 Parts Life Reset
Confidential