Table of Contents
Advertisement
Using the On-Screen Display
The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
To navigate through the tabs in the Main Menu, press the
the control panel. To select a submenu, press the Enter button on the control
panel.
To select an option, press the
item is selected, the color changes to dark blue. Use the
the control panel to adjust the settings.
To go back to Main Menu, go to Back tab and press the Enter button on the
control panel.
To exit the OSD, go to EXIT tab and press the Enter button or press the
Menu button directly on the control panel.
Main Menu
AUTO-ADJUST
the following message appears on the screen, "Auto Adjustment in
Progress...".
INPUT SOURCE
The Input Source menu allows you to select your projectors input source.
when the Auto Source mode is set to Off, you can manually select the input signal.
VGA—Press Enter to detect VGA signal.
OMPOSITE
—Press Enter to detect Composite Video signal.
C
16
Using Your Projector
Downloaded from ProjectorsManual.com Manuals
or
button on the control panel. When an
Auto Adjust automatically adjusts the
projector's Frequency and Tracking in PC
mode. While Auto Adjustment is in progress,
UTO
OURCE
—Select On (the default) to auto detect
A
S
the available input signals. If you press the Source
button when the projector is on, it automatically finds
the next available input signal. Select Off to lock the
current input signal. If you press the Source button
or
button on
or
button on
Advertisement
Table of Contents
