D-Link DSL-2540U User Manual page 64

DSL-2540U ADSL/Ethernet Router with Built-in Switch
User Manual
You can specify the following parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
Click the Save button.
To edit an existing route, select the needed route in the table. On the opened page, change the
needed parameters and click the Save button.
To remove an existing route, select the needed route in the table. On the opened page, click the
Delete button.
If you need to specify a host from the LAN as the default route, select the <Auto> value from the
Via Interface drop-down list, enter 0.0.0.0 in the Destination network and Destination
netmask fields, enter the IP address of the host from the LAN in the Gateway field, and then
click the Save button.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be
accessed. The field is displayed when the <Auto> value is selected
from the Via Interface drop-down list.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface (connection) through which the destination
network can be accessed from the drop-down list. If you have
selected the <Auto> value of this drop-down list, the router itself
sets the interface on the basis of data on connected networks.
Page 64 of 86
Configuring via Web-based Interface
Description