Service Program - Electrolux W465H Service Manual

28

Service program

The service program is used to facilitate trou-
bleshooting the machine. Using this program
you can:
• control the machine functions individually
• check the sensor signals to the CPU
• check the communication in the machine
control system
• calibrate the weighing function
• weigh and measure unbalance
• check the display
Engage service mode, mark the SERVICE row in
4
the main menu and press the knob.
The display will now show the different subme-
nus in the service program.
• ACTIVATE OUTPUTS
5
• SHOW INPUTS
• ARTICLE NUMBER
• SHOW DLCU COM.
• RESET DLCU
• SHOW MCU COM.
• RESET MCU
• SHOW SINGLE
• SHOW COM.PORTS
• WEIGHT CALIBRATION
• MEASURE WEIGHT
• MEASURE UNBALANCE
• DISPLAY TEST
Select the desired menu and press the knob.
Program unit
4
MAIN MENU
01.00.00.00
SERVICE
PARAMETER PROGR.
STATISTICS
CONFIG 1
CONFIG 2
ADJUST DISPLAY
5
*SERVICE*
01.01.00.00
ACTIVATE OUTPUTS
SHOW INPUTS
ARTICLE NUMBER
SHOW DLCU COM.
RESET DLCU
6204
6204