Panasonic DMP-BDT167 Basic Operating Instructions

Basic Operating Instructions
Unless otherwise indicated, illustrations in these
operating instructions are of DMP-BDT280.
Firmware updates
Panasonic is constantly improving the unit's firmware
to ensure that our customers are enjoying the latest
technology.
Panasonic recommends updating your firmware as
soon as you are notified.
For details, refer to the back side of this leaflet.
Model number suffix "EB" denotes UK model.
EB GN GA GH
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
A more detailed operating instructions is available in "Operating Instructions (PDF format)". To read it,
download it from the website.
http://av.jpn.support.panasonic.com/support/global/cs/bd/oi/index.html
You will need Adobe Reader to browse or print the Operating instructions (PDF format).
You can download and install a version of Adobe Reader that you can use with your OS from the following
website.
http://www.adobe.com/products/acrobat/readstep2.html
Accessories
Check the supplied accessories before using this unit.
1 Remote control
[BDT167] [BD84]
1 AC adaptor
[BDT280]
[For_the_United_Kingdom_and_Ireland] [For_the_United_Kingdom_and_Ireland,_HongKong]
(N2QAYB001031) (SAE0003)
[For_Australia_and_New_Zealand]
[For_Australia_and_New_Zealand]
(N2QAYB000962) (SAE0004)
[For_the_South_East_Asia]
[BDT180]
[For_the_United_Kingdom_and_Ireland] (SAE0002)
(N2QAYB001030)
[Except_the_United_Kingdom_and_Ireland]
[For_the_South_East_Asia_and_HongKong]
1 HDMI Cable
(N2QAYB001033)
[BDT167] [BD84]
[For_the_United_Kingdom_and_Ireland]
≥ Product numbers are provided in these operating instructions
[For_Australia_and_New_Zealand]
correct as of December 2015. These may be subject to change.
(N2QAYB001029)
≥ Do not use AC mains lead and AC adaptor with other
[For_the_South_East_Asia_and_HongKong]
equipment.
(N2QAYB000958) ≥ Do not use any other AC mains lead and AC adaptors except
2 Batteries for remote control the supplied one.
[BDT280] [BDT180]
* See "STEP 1: Connecting to a TV" for more information.
AC mains lead
Using the remote control
[For_the_United_Kingdom_and_Ireland]
(K2CT2CA00007)
[For_Australia_and_New_Zealand] 
(K2CJ2DA00014)
[For_the_South_East_Asia_and_HongKong]*
– Insert the batteries to the terminal so that it (i and j)
matches those in the remote control.

Control reference guide

When other Panasonic devices respond to the remote control of the unit, change the remote control code.
[For_the_United_Kingdom_and_Ireland] [For_the_South_East_Asia_and_HongKong]
[For_Australia_and_New_Zealand]
11
1 1
2 2
[BDT180]
[BDT167]
12
abc
[BD84]
13
3 jkl mno 3
pqrs tuv wxyz 14
pqrs
4
15 4
5 5
6 6
7 16 7
17
18
8 8
19
9 20 9
10 10
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit's remote control. Some buttons may not work
depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
TM
Blu-ray Disc Player [i j VOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or
Model No. DMP-BDT280
characters
[BDT280] [BDT180]
4 Cancel
DMP-BDT180
5 Change soundtrack
DMP-BDT167
6 Basic playback control buttons
DMP-BD84
7
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
Show Pop-up menu
[For_the_South_East_Asia_and_HongKong]
Show USB Sharing menu
8 Show Top menu
9 Show Option menu
[BDT280]
SQT1274
[BDT180]
F1215BD0
[BDT167]
[BD84]
1 Disc tray
2 USB port
3 POWER LED
The LED lights when the unit is turned on, and
flashes when error occurs.
4 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and right

Quick Start Guide

STEP 1 : Connecting to a TV
[BDT280] [BDT167]
[BD84]
[BDT180]
[BDT280]
[BDT180]
[BDT167]
[BD84]

R6/LR6, AA
(Alkaline or manganese
batteries)
[BDT180] [For_the_South_East_Asia_and_HongKong]
2 AC mains leads are supplied.
Use the AC mains lead that matches the socket for the area you live in.
≥ Thailand: With a label
≥ This unit consumes a small amount of AC power ( "Specifications") even when turned off in standby mode.
11
For the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
≥ The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
[BDT167] [BD84]
always "live" as long as the AC adaptor is connected to an electrical outlet.
[BDT180]
[BD84]
12 Caution for AC Mains Lead
abc
13
jkl mno
14 (For the AC mains plug of three pins)
tuv wxyz
15
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
16
If the plug contains a removable fuse cover you must ensure that it is
17
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
18
A replacement fuse cover can be purchased from your local dealer.
19 Before use
Remove the connector cover.
20
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display.
11 Transmit the remote control signal
12 Open or close the disc tray
13 Show the status messages
14
[BDT280]
TM
Show Miracast screen
[BDT180] [BDT167] [BD84]
Switch Secondary Video on/off (Picture-in-picture)
15 Show the Home Screen of Network Service
16 Exit the Menu screen
17
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
Show Netflix screen
[For_the_South_East_Asia_and_HongKong]
Show Pop-up menu
18 Show HOME menu
19 [3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame
20 Return to previous screen
5 6 7 8
1 2 3 4
5 8
1 4 3 2
5 Open or close the disc tray
6
[BDT280] [BDT180]
Stop
7
[BDT280] [BDT180]
Start play
8 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
HDMI IN
HDMI cable
( [Except_the_United_Kingdom_and_Ireland] supplied)
AC adaptor (supplied)
To a household mains socket
AC mains lead (supplied)
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Fuse
Figure A Figure B
Fuse
(5 ampere)
(5 ampere)
STEP 2 : Connecting to the network
[BDT280]
∫ Wireless LAN connection
Wireless router, etc.
∫ LAN cable connection
[BDT280]
[BDT180]
Broadband router, etc.
LAN Cable
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
STEP 3 : Settings
1 2
HDMI
TV
Turn on the TV and select the appropriate video Press [Í/I].
input. Follow the on-screen instructions to continue with
the settings.
STEP 4 : Playback
1 2
Press [OK] or [3, 4, 2, 1] to select the item.
Insert the media.
≥ If there are any other items, repeat this step.
Operating during playback
Following functions may not work depending on the media and contents.
The stopping point is memorized.
Resume play function
Stop Press [∫STOP].
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
Pause Press [;PAUSE]. Press [;PAUSE] again or [1PLAY] to restart play.
While playing, press [SEARCH6]
Search
The speed increases up to 5 steps.
or [SEARCH5].
≥ Press [1PLAY] to revert to normal playback speed.
Slow motion While paused, press [SEARCH5].
While playing or paused, press
Skip Skip to the title, chapter or track.
[:] or [9].
Playable media
BD-Video: Video ∫ Region management information
BD-RE: Video, JPEG, MPO*, AAC, ALAC, DSD,
The unit can play back BD-Video/DVD-Video discs of
FLAC, MP3, WAV, WMA
the following regions codes, including "ALL":
BD-R: Video, MKV, Xvid, AAC, ALAC, DSD, FLAC,
Example:
MP3, WAV, WMA
[For_the_United_Kingdom_and_Ireland]
DVD-Video: Video
DVD-R/DVD-R DL : Video, AVCHD, MKV, Xvid,
JPEG, MPO*, AAC, ALAC, DSD, FLAC, MP3, WAV,
WMA
DVD-RW/+R/+RW/+R DL : Video, AVCHD
[For_Australia_and_New_Zealand]
Music CD : Music [CD-DA]
CD-R/CD-RW : MKV, Xvid, JPEG, MPO*, AAC,
ALAC, FLAC, MP3, Music [CD-DA], WAV, WMA
USB devices (up to 4 TB) : MKV, MP4, MPEG2,
Xvid, JPEG, MPO*, AAC, ALAC, DSD, FLAC, MP3,
[For_the_South_East_Asia_and_HongKong]
WAV, WMA
* [BDT280] [BDT180] [BDT167] only
Internet
[BDT167]
[BD84]
Internet
HDMI
BD-Video DVD-Video
2
4
3