Installation; Firmware & Drivers; Virtualdj 8 Setup - Pioneer XDJ-R1 Operation Manual

Installation

Firmware & Drivers
Firmware (for both Windows and Mac OSX): Update the firmware of the unit to the latest
version from http://www.pioneerdj.com/en/support/software/xdj-r1/#firmware-update
Drivers (for Windows only): Install the latest Pioneer ASIO drivers from
http://www.pioneerdj.com/en/support/software/xdj-r1/#drivers
No driver is required for Mac OSX computers. Mac OS standard audio driver will be
automatically installed when the XDJ-R1 is connected to your Mac with a USB cable.

VirtualDJ 8 Setup

Download and install
http://www.virtualdj.com/download/index.html
(in case you have not done already)
Once VirtualDJ 8 is launched, a Login Window
will appear to enter your virtualdj.com account
credentials. A Pro Infinity, a Plus Controller
or a Pro Subscription License is required to
fully use the Pioneer XDJ-R1. Without any of
the above Licenses, the controller will operate
for 10 minutes each time you restart VirtualDJ.
http://www.virtualdj.com/buy/index.html
The Pioneer XDJ-R1 is also operating with the
bundled VirtualDJ LE version.
A detection window will appear right after,
asking to use or not the pre-defined audio
setup with the built-in sound card of the XDJ-
R1. You can still change that from Settings-
>AUDIO tab.
If the tailored XDJ-R1 skin
additional button Change
available to load the skin, or continue with the
default skin of VirtualDJ 8.
An additional Enter Keycode button will be available if the
installed.
Make your selection and press OK
VirtualDJ 8 from
is pre-installed, an
Skin will be
. The unit is now ready to operate.
VirtualDJ 8 – Pioneer XDJ-R1
VirtualDJ 8 Limited Edition is
3