AEG PMR Voxtel R200 Quick Start Manual page 9

4.4.2 Setting the DCS advanced digital code
Each channel also has 83 digital codes to let you set up group of users
for more secured private communication.
Press the menu button
screen.
Press the up
Press the PTT button to confirm the DCS channel setting.
Transmitting and receiving
The PMR transmission is "one way-at-a-time." While you
!
are speaking, you can not receive a transmission.
The PMR is an open-license band. Always identify yourself
when transmitting on the same channel.
4.5 Receiving
The unit is continuously in the receive mode when the unit is turned on
and not transmitting. When a signal is received on the current channel,
icon will be displayed on the LCD screen
RX
4.6 Transmitting (sending a speech)
Press and hold the PTT (push to talk) button to transmit your voice.
icon will be displayed on the LCD screen.
TX
Hold the unit in a vertical position with the microphone 5 cm away
from the mouth. While holding the PTT button, speak into the
microphone in a normal tone of voice.
Release the PTT button when you have finished speaking.
4.7 Monitor
You can use the monitor feature to check for weak signals on the
current channel.
Press and hold the menu
icon will be displayed on the LCD screen. Your unit will pick up
RX
signals on the current channel, including background noise.
Press the menu button
AEG R200_V1.indd 9
3 times. DCS code is blinking on the LCD
or down button to select the desired DCS code.
and down buttons at the same time.
to stop the channel monitoring.
9
29/06/2012 21:43:31