Image Stabilization mode
The Image Stabilization mode combats the
effect of hand shake and allows you to take
pictures that would otherwise be blurred.
1.Switch the mode dial to (
2.Press Shutter halfway to focus on the
subject.
3.Press Shutter fully to capture the image.
Downloaded From camera-usermanual.com General Electric Manuals
Setting the Image Stabilization function under
(
(Stabilization during Movie mode is only
available when the Frame Rate is set to 15 fps)
1.Switch the mode dial to (
2.Press the
menu.
3.Use the Left/Right navigation buttons to
highlight the Quality function.
4.Use the Up/Down navigation buttons to
select 15fps, and press the
) mode.
confirm your settings.
5.Press the Menu button, and use Up/Down
to select the Image Stabilization settings.
6.Use Up/Down to select Off or On.
Then press the
) mode.
button to enter the Function
button to confirm.
) mode.
button to