Samsung 6 SERIES Installation Manual page 32

Hotel TV Function
Category Item
Network Setup
Network
SmartHub Model
Setting
SmartHub Setting
Service Discovery
Lan Out
VLAN ID
Solution VLAN ID
Device VLAN ID
Widget Mode
Solution Type
Server URL Setting
License Server IP
Widget
Setting
Solution
IPTV Mode
Virtual Standby
Room Num Setting
Virtual Standby
Virtual Mode
Standby
Reboot Time
32
English
Initial value
Set an IP address to establish an Internet connection.
Soft AP: Using this function, you can connect the TV on your mobile devices. Set
the options for connection of Wi-Fi device.
• Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile
devices can find the TV name in Wi-Fi connection list.
• Security key: Set a security key that you need to enter on other devices so they
can connect to the TV.
‒ Input the generated security key into the device you want to connect.
‒ If network does not operate normally,check the security key again. An
incorrect security key may cause a malfunction.
✎ Soft AP may not be available if it is not supported by the model.
✎ Maximum number of devices that can be connected: 4 devices.
✎ Bitrate : 10 Mbps/device.
✎ The specifications above are based on our in-house testing. Actual performance
may vary depending on your wired/wireless network environment.
Set Smart Hub Model.
Set up Smart Hub.
If this option is set to On, you can share content with other devices, such as
On
smartphones, in DLNA mode.
Enable/disable LAN Out. When enabled, the TV can work as a wired router for
OFF
other network devices.
Create separate VLAN groups. A 3-digit number can be entered between 1 and 255
...
for the VLAN ID.
When VLAN is used, set a VLAN ID to be assigned to a Solution (such as SYNC,
...
H.Browser etc.).
... Set a VLAN ID to be assigned to external devices connected to the LAN OUT port.
ON Widget Mode On/Off.
Vendor Server Select type of solution (Vender Server/ SINC Server).
Set server URL.
... Set server IP.
ON IPTV mode On/Off.
Virtual Standby mode On/Off.
OFF
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on the size of the TV screen).
Set Room Number.
TV can supply the main feature in the standby mode if The TV mode is set to the
Virtual Standby mode.
• ON: The Virtual Standby mode is enable.
OFF
• OFF: The Virtual Standby mode is disable.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on the size of the TV screen).
This Feature can set the Reboot interval of TV after TV enters Virtual standby
...
Mode.
Description