Folding The Handle; Removing The Mower From Storage - Toro 20090 Operator's Manual

Folding the Handle

1. Rotate the handle forward (Figure 34).
Important: Route the cables to the outside of
the handle knobs as you fold the upper handle.
2. To unfold the handle, refer to Assembling and
Unfolding the Handle in the Setup section.
Figure 34
Removing the Mower from
Storage
1. Remove the spark plug and spin the engine rapidly
using the starter to blow the excess oil from the
cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N⋅m).
3. Connect the wire to the spark plug.
15