Display Screen Symbols Explained - Kenwood CCC20 Instructions Manual

Display screen symbols explained

cq
cr
cs
ct
dk
dl
dm
Shows temperature selected
= 65°C
= 92°C
= 100°C
The red warning triangle appears on the display screen if the lid is
removed or not locked into position.
This is the time selected in hours and minutes.
The time will count down once the Start/Pause button is pressed.
Indicates which stir function has been selected
- continuous stir – constant slow speed suitable for stirring
sauces.
- intermittent stir with short pauses. When set to this position
intermittently operate on a slow speed once every 5 seconds
for approximately 2 revolutions.
- intermittent stir with long pauses. When set to this position,
intermittently operate on a slow speed once every 30
seconds, making it suitable for stirring casseroles etc.
Hot warning indicator – The red bar will appear on the display
screen if the bowl temperature is above 60°C.
Indicates the programme stage from 1 to 4.
When the is displayed on the screen the cooking process will
continue and no further action is required.
If leaving the appliance in this mode pay close attention to the
following:-
a) Ensure the instructions are followed with regards to temperatures
and maximum quantities to process. Do not over fill above the
1.5 litre mark.
b) Make sure the unit and cord are positioned out of the reach of
children and away from the edge of the work surface.
c) If the time is set for 1 hour or above check progress on a regular
basis to ensure enough liquid is added and food is not
overcooking.
d) The symbol will only display when the temperature is set to 92°C
or 65°C and when pre-set programmes are used.
6