Honeywell HD32X User Manual page 7

CLEANING THE IFD
®
The ifD filter should be cleaned approximately once every 3 months.
®
To clean the ifD filter:
®
• Turn the power off and unplug the air purifier.
• After removing the ifD
wash the ifD filter.
®
Rinsing:
• Rinse the filter with clean tap water (Fig. 9)
• If the filter still appears dirty, proceed to "Washing,"
otherwise proceed to "Drying."
Washing:
• Remove the ifD filter from the unit.
®
• Fill a sink with lukewarm water and add a few drops of mild dish soap.
• Gently swish the filter in the soap solution to clean.
• Soak the filter for 2-3 minutes. Do not leave for an extended period of time.
• Rinse the filter with clean tap water (Fig. 9).
Drying:
• Shake the filter to remove any excess water.
• Place the filter with the honeycomb side down on a plush towel.
• Note that the filter may still be discolored even after washing.
This is acceptable and will not affect performance.
• Allow the ifD filter to dry for a few hours or overnight.
®
• When the ifD filter is completely dry, place back into the air purifier.
®
CAUTION:
• Never place a wet ifD
• The ifD filter is NOT dishwasher safe. Do not place the ifD
®
extreme hot water conditions.
• Do not use any solvents, strong cleaning agents or flammable liquids to clean the ifD
FILTER
filter from the air purifier, follow the steps below to
®
filter in your air purifier.
®
filter in a dishwasher or subject it to other
®
Fig. 9
filter.
®
7