Additional Operations - Sony SLV-SE610 Service Manual

QQ
3 7 63 1515 0
2
Set the date, start and stop times,
programme position or station
PLAY
name*, tape speed, and VPS/PDC
OK
function*:
1 Press , to highlight each item in
INPUT SELECT
turn.
2 Press M/m to set each item.
To correct a setting, press < to return to that setting and reset.
• To record the same programme every day or the same day every
week, see "Daily/weekly recording" on page 60.
• To use the VPS/PDC function*, set VPS/PDC to ON. For details
about the VPS/PDC function, see "Timer recording with VPS/
PDC signals" on page 57.
• To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT to display the
connected line in the "PROG." position.
3
Press MENU to exit the menu.
MENU
Press ?/1 to turn off the VCR.
4
The
by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to
Saturday) t MON-FRI (Monday to Friday) t SAT (every Saturday) .....
t MON (every Monday) t SUN (every Sunday) t 1 month later t
(dates count down) t TOMORROW t TODAY
TE
L 13942296513
60 Recording TV programmes using the timer
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC
function* won't work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function*.
indicator flashes in the display window when you press ?/1 with no tape
• The
inserted.
• The VPS/PDC function* is automatically set to OFF for the timer recording of a
satellite programme.
• The station name* may not appear if the VCR does not receive station name
information signals.
* not available on SLV-SE610N/K
www
.
62
Recording TV programmes using the timer
http://www.xiaoyu163.com
TIMER
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP
LIST
SELECT :
SET :
CANCEL : CLEAR
indicator appears in the display window and the VCR stands
x ao
y
i
http://www.xiaoyu163.com
8
To record satellite broadcasts
If you connect a satellite tuner and the VCR, you can record satellite
2 8 . 9 FRI
PROG.
programmes.
3 5
VPS / PDC OFF
1
Turn on the satellite tuner.
2
On the satellite tuner, select the satellite programme for which you want
to make a timer setting.
EXIT : MENU
3
Follow steps 1 through 4 above.
4
Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 44).
• Display tape information on the TV screen (page 47).
• Check the timer settings (page 68).
• Watch another TV programme (page 47).
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the programme position with a two digit number, press - (ten's digit)
button followed by the programme number buttons.
• To set the line input video source, you can also use the PROG +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
LONG PLAY to OFF in the OPTIONS-1 menu (page 85).
• Even if you set TIMER OPTIONS* to SHOWVIEW in the OPTIONS-2 menu, you
can set the timer manually. Press MENU to select TIMER, then go to step 2.
• To check, change, or cancel the programme setting, press </, to choose LIST,
then press OK in step 2. For details, see step 3 in "Checking/changing/cancelling
timer settings" (page 68).
Q Q
3 6 7 1 3

Additional Operations

Playing/searching at various speeds
Before you start
• Refer to "Index to parts and controls" for button locations.
Playback options
View the picture during
fast-forward or rewind
Play at high speed
Play at twice the normal
speed
Play in slow motion
Play frame by frame
Rewind and start play
To resume normal playback
Press H PLAY.
Using the shuttle ring
(SLV-SE810N/K only)
With the shuttle ring, you can
operate a variety of playback
options. There are two ways for
using the shuttle ring, normal
mode and jog mode.
u163
.
1-15
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
Recording TV programmes using the timer
...
Operation
During fast-forward, hold down M FF/M. During rewind,
hold down m REW/m.
• During playback, press M FF or m REW on the remote
commander.
• During playback, hold down M FF/M or m REW/m.
When you release the button, normal playback resumes.
During playback, press ×2.
During playback, press y SLOW.
During pause, press M FF or m REW on the remote
commander. Hold down M FF or m REW to play one
frame each second.
During stop, press H (play) on the VCR while holding down
m on the VCR.
m
co
Playing/searching at various speeds
9 9
indicator
2 8 9 9
continued
61
JOG
Shuttle ring
continued
63