Samsung HW-H750 User Manual page 27

● Updating firmware may not work
properly if audio files supported by
the Soundbar are stored in the
USB storage device.
● Do not disconnect the power or
remove the USB device while
updates are being applied. The
main unit will turn off automatically
after completing the firmware
update.
● After reset, all settings are reset to
their factory default settings. We
recommend you write down your
settings so that you can easily
reset them after the update.
Note that updating firmware resets
subwoofer connection too.
If connection to the subwoofer is
not established automatically after
resetting, refer to page 13.
If the firmware fails to update, we
recommend formatting the USB
device in FAT16 and trying again.
● Do not format the USB device in
the NTFS format. The Soundbar
does not support the NTFS file
system.
● Depending on the manufacturer,
some USB devices may not be
supported.
+Auto update
Even when the Soundbar is turned off, the
Soundbar will automatically check latest
software version and continue to update if it
was connected to the Internet.
● The Soundbar is configured to run
auto update by default.
● To use auto update function, the
Soundbar must be connected to
the Internet.
● Wi-Fi connection to the Soundbar
will be terminated if its power cord
was disconnected or the power
was cut off. Turn on the Soundbar
and reconnect.
27
FUnCTIOnS