Display (In Video Mode) - Dell M409WX User Manual

V
ERTICAL
up.
F
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering bar, use
Frequency control to minimize the bars. This is a coarse adjustment.
T
RACKING
graphic card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.

DISPLAY (in Video Mode)

projector automatically switches to Custom.
S T
IGNAL
to RGB, YCbCr, or YPbPr.
Z —Press
OOM
screen and press
Z N
OOM AVIGATION
W I
HITE NTENSITY
the brightness.
D
EGAMMA
the Degamma value to: 1, 2, 3, and 4. Adjust among the 4 preset values to change
the color performance of the display.
Downloaded From projector-manual.com DELL Manuals
P —Press
OSITION
—Allows you to change the display data clock frequency to match the
—Allows you to synchronize the phase of the display signal with the
—Allows you to manually select the signal type. You set the signal type
YPE
to digitally magnify a default area of image in the center of the
to reduce the zoomed image.
—Press
—Set 0 to maximize the color reproduction and 10 to maximize
—Allows you to adjust the color performance of the display. You can set
to move the image down and
to navigate projection screen.
to move the image
V M —Allows you to
IDEO ODE
optimize the projector's
display mode.
•PC, Movie, sRGB -
provides accurate color
representation
•Game, and Custom - set
your preferred settings
NOTE:
If you adjust
the settings for White
Intensity or Degamma, the
Using Your Projector 25