Part Names And Functions (Front); Part Names And Functions (Rear) - Samsung XRN-2010 User Manual

PART NAMES AND FUNCTIONS (FRONT)

XRN-2010
NETWORK VIDEO RECORDER
XRN-2011
NETWORK VIDEO RECORDER
Part Names
REC : Lights on when recording is in progress.
HDD : Displays the normal access to HDD.
LED turns on when accessing the hard disk.
ALARM : Lights on when an event occurs.
LED Indicator
NETWORK : Displays both network connection and data transfer status.
BACKUP : Stays ON when backup is in operation. (XRN-2010)
RAID : Stays ON when RAID is in use. It flickers if backup is activated when RAID is in use.
Flickers only when backup is in operation if RAID is not in use. (XRN-2011)
POWER : Shows the power ON/OFF status.
USB Connects the USB devices.
USB
USB
Functions
(USB 2.0 supported)

PART NAMES AND FUNCTIONS (REAR)

ALARM IN
1 2 3 4 5 6 7 8
NO NC NO NO NO
COM COM COM COM
1 2 3
Part Names
Terminal to connect a separate ground cable.
Ground connection
`
Add a ground cable to support the safe use of the device.
VGA OUT VGA Video Signal Output Port.
- ALARM IN : Alarm input ports.
ALARM - ALARM RESET : Alarm Reset port
- ALARM OUT : Alarm output ports.
eSATA Terminal to connect an external storage device.
NETWORK1 Port recommended for camera connection, which receives an image from the camera.
NETWORK2 Port recommended for connection with a network, web viewer or iSCSI.
AUDIO OUT Audio Signal Output Port (RCA jack).
RS-232C Cable terminal for serial communication (spare).
HDMI HDMI connector port.
USB Connects the USB devices. (USB 3.0 supported)
Power Terminal to connect power
`
M [CONSOLE] is designed for the service repair purpose only.
ALARM
RESET
NETWORK 2
G
VGA OUT
eSATA NETWORK 1 AUDIO OUT RS-232C HDMI USB CONSOLE
G
ALARM OUT
4
Functions
(1~8 CH)
(1~4 CH)
to.
English _7