Warning Symbols - Black & Decker SNC3650L252 Original Instructions Manual

ENGLISH
Use only attachments and accessories approved by the
u
manufacturer of snow thrower (such as wheels).
Never operate the snow thrower without good visibility or
u
light. Always be sure of your footing, and keep a firm hold
on the handles. Walk; never run.
Do not carry passengers.
u
Never operate the snow thrower without good visibility or
u
light.
Take all possible precautions when leaving the machine
u
unattended remove the safety key.
After use
When not in use, the appliance should be stored in a dry,
u
well ventilated place out of the reach of children.
Children should not have access to stored appliances.
u
When the appliance is stored or transported in a vehicle it
u
should be placed in the boot or restrained to prevent
movement following sudden changes in speed or
direction.
Inspection and repairs
Before use, check the appliance for damaged or defective
u
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or
u
defective.
Have any damaged or defective parts repaired or replaced
u
by an authorised repair agent.
Never attempt to remove or replace any parts other than
u
those specified in this manual.
Additional safety instructions for Snow throwers
Mow across the face of slopes, never up and down.
u
Exercise extreme caution when changing direction on
slopes.
Watch for holes, ruts, bumps, rocks or other hidden
u
objects. Uneven terrain could cause a slip and fall
accident. Tall grass can hide obstacles.
Do not operate on wet grass or excessively steep slopes.
u
Poor footing could cause a slip and fall accident.
Do not operate near drop-offs, ditches, or embankments.
u
You could lose your footing or balance.
Do not use hands to unclog chute.
u
Stop motor before removing debris.
u
Do not direct discharge at bystander
u
Safety of others
This appliance is not intended for use by persons
u
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
6
(Original instructions)
Children must be supervised to ensure that they do not
u
play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving
u
parts.
Injuries caused when changing any parts, blades or
u
accessories.
Injuries caused by prolonged use of a tool. When
u
using any tool for prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed
u
when using your tool (example:- working with wood,
especially oak, beech and MDF.)

Warning symbols

The following warning symbols are found on the appliance
along with the date code:
Warning! Read, understand and follow all
instructions in the user manual(s) before
R
attempting to assemble and operate.
Warning! Do not expose the appliance to rain
or wet conditions. Keep dry.
Warning! Beware of sharp blades.
Always turn the machine OFF and remove the
safety key before conducting inspection,
cleaning and maintenance.
Warning! Beware of flying stones and other
foreign objects that could be thrown from the
appliance. Keep bystanders away from the
working area.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Keep hands,feet and clothing away from the
rotating auger to avoid injury.