Connecting To The Network - Sony BDV-L600 Operating Instructions Manual

Connecting to the network

• To connect the system to your network, you need to make network settings that suit your usage environment and
components. For details, see "Setting up the Network" (page 53) and "[Network Settings]" (page 63).
Select the method based on your LAN (Local Area Network) environment.
Internet
ADSL modem/
cable modem
1 Wired Setup
Use a LAN cable to connect to the LAN(100) terminal on the main unit.
2 USB Wireless Setup
Use a wireless LAN via the USB Wireless LAN Adapter (Sony UWA-BR100* only).
The USB Wireless LAN Adapter may not be available in some regions/countries.
* As of March 2011.
Turn the main unit off before connecting the extension cable or inserting the USB Wireless LAN
Adapter. After inserting the USB Wireless LAN Adapter to the base and connecting the extension cable
to the (USB) port (rear or left) (page 9), turn the main unit on again.
• The placement distance between the USB Wireless LAN Adapter and your wireless LAN router differs based on
your usage environment. If the system cannot connect to the network or the network connection is unstable, move
the USB Wireless LAN Adapter to a different position or place the USB Wireless LAN Adapter and the wireless
LAN router closer to each other.
• You can also get information for network settings from the following Sony support page:
English: http://www.sony.ca/support
French: http://fr.sony.ca/support
Broadband
router
LAN cable
(not supplied)
Rear panel of the main unit
USB Wireless LAN
Adapter
(not supplied)
21
US