Advertisement
If this happens simply press +HR button (2) again and the boost will activate for the
time period chosen.
POWER INTERRUPTION
In the event of a mains supply failure the screen will go blank but the back-up battery
ensures that the programmer continues to keep the time and retain your stored
programme. When power is restored, if there has been no change to the rear DIP
switch, the programmer then goes to RUN mode.
If the configuration setting on the rear DIP switch has been altered during the power
interruption the screen will initially show the new configuration. And the appropriate
factory default programme ( see BUILT IN PROGRAMME section) will be installed.
Press SET button to return to RUN mode.
Technical Helpline: 01475 745131
SERVICE AND WARRANTY
Your product is not user serviceable. PLEASE DO NOT TRY TO DISMANTLE THE UNIT.
This product is guaranteed by your supplier for 3 years from the Date of Manufacture. If it should become
defective, please contact your installer or supplier for a replacement unit or visit www.sangamo.co.uk/returns.
An extended warranty may be purchased online (www.sangamo.co.uk/warranty)
CUSTOMER CARE POLICY
As part of Sangamo's continuous improvement program, the Company operates a Customer Care Policy.
This means that we welcome your comments and complaints, as it can help us to improve our services to you,
our customer.
Due to our policy of continuous product improvement and development, the specifications in this guide may be subject to
change without prior notice.
Sangamo Limited, Industrial Estate, Port Glasgow, Renfrewshire PA14 5XG
Tel: 01475 745131
Email: enquiries@sangamo.co.uk
Fax: 01475 744567
Web: www.sangamo.co.uk
143701_A
CHOICE PR 1
USER INSTRUCTIONS
1 CHANNEL PROGRAMMER
What is a central heating programmer...?
Central Heating programmers allow you to set 'On' and 'Off' time periods for your
heating and/or hot water. One Channel models switch your central heating and
domestic hot water on and off at the same time, while the two and three channel
versions control your domestic hot water and heating to come on and go off at
different times. Three channel programmers are often used to provide separate control
for two heating zones (perhaps upstairs and downstairs) as well as the separate control
for your hot water.
Sangamo Choice programmers make it easy to set the 'On' and 'Off' time periods to suit
your own lifestyle, with options for; 7 day, 5/2 day, and 24 hour programming. You can
also choose to have your heating and hot water on continuously or be permanently off.
Choice programmers also adjust automatically between Greenwich Mean Time and
British Summer Time. The Choice programmers even have a default set of
programmes, so you can decide not to adjust the programming at all! And to improve
your comfort, you can temporarily adjust the heating programme, with the Choice;
'Advance' or 'Boost' buttons.
Advertisement
