Specifications - Makita DUB361 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
-1
No load speed (min
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Keep a hand away from rotating parts.
･
Danger; be aware of thrown objects.
･
Keep bystanders away.
･
Wear eye and ear protection.
･
Do not expose to moisture.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Model
Air volume (HIGH)
Air volume (LOW)
HIGH
)
LOW
(without long nozzle)
(with long nozzle)
Net weight
Rated voltage
of the
and returned
END012-4
Intended use
The tool is intended for blowing dust.
Noise
The typical
according to EN15503:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 1.6 dB (A)
Vibration
The vibration
determined according to EN15503:
Work mode : operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
European
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
to an
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
DUB361
3
4.4 m /min
3
2.6 m /min
17,000
10,000
420 mm
905 mm
3.1 kg
D.C. 36 V
A-weighted noise level
) : 82.3 dB (A)
pA
) : 94.7 dB (A)
WA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s
h
2
ENE018-1
ENG102-3
determined
ENG900-1
vector sum)
or less
ENG901-1