Using Color Slow Shutter; Nightshot - Sony DCR-TRV250 Operating Instructions Manual

Recording a picture
Using Color Slow Shutter _
The Color Slow Shutter function enables you to record color images in a dark place.
(1) Set the POWER
switch to CAMERA, and slide NIGHTSHOT to OFF.
(2) Press COLOR SLOW S.
The [] indicator and COLOR SLOW SHUTTER flash on the screen.
To cancel the Color Slow Shutter function, press COLOR SLOW S again.
Notes
• Do not use the NightShot function in bright places (e.g. outdoors in tile daytime). This
may cause your camcorder to malfunction.
• When you keep NIGHTSIIOT set to ON in normal recording, tile picture may be
recorded in incorrect or unnatural colors.
• If focusing is difficult with the autofocus mode when using the NightShot function,
focus manually.
While using the NightShot function, you cannot use the following functions:
Exposure
PROGRAM AE
While using the Super NightShot or Color Slow Shutter function, you cannot use
the following functions _ _ :
Fader
Digital effect
Exposure
PROGRAM AE
While using the Super NightShot or Color Slow Shutter function =1_
The shutler speed is automatically adjusted depending on tile brighmess. The motion of
the picture will be slow.
NightShot Light
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using tile NightShot Light is about 3 m (10 feel).
While recording, be sure not to cover the infrared rays emitter with your fingers, etc.
In total darkness _
The Color Slow Shutter function may not work normally.
40