Table of Contents
Advertisement
Other Functions
Auto power-off
The MCS1 incorporates an auto power-off function.
If the MCS1 is idle for more than five minutes, the unit automatically turns
itself off. To turn it on again, hold down the POWER button for at least 2
seconds.
In the following cases, auto power-off is disabled:
• While data is copied to a CD-R
• While the slide show function is active
• During finalization
• While an error message is displayed
Switching the operation mode
The MCS1 has six operation modes. Normally, the operation mode is
selected automatically, but you may want to switch it manually in the
following cases.
• When multiple media or devices are connected at the same time
• When you want to add data to a non-finalized CD-R
• When you want to finalize a non-finalized CD-R
The operation mode of the MCS1 can be switched using the MODE button.
Each push of the button cycles through the settings.
28
z
Hint
When several media and/or devices are connected simultaneously, the priority
order becomes the following:
• With VIDEO OUT
1. Digital still camera or USB storage media.
2. "Memory Stick" media
3. CD-R
• When copying data
1. Digital still camera
2. "Memory Stick" media
Advertisement
Table of Contents
