Cleaning, Maintenance And Storage - Black & Decker BD2000s Original Instructions Manual

- Connect the equipment you want to use to
Important!
- Never connect the generator to the
domestic power network as this may result
in damage to the generator itself or to other
electrical appliances in your home.
- Switch off the machine immediately and
contact your service station:
- If the generator is making unusual
vibrations or noise.
If the engine is overloaded within rated load
jigsaws, drills, etc.) may have a higher level
conditions or starting.
- Use the supplied DC connecting cable
to make connection to 12VDC powered
appliance.
Important!
The 12 V DC output of the generator is not
treated by a precise electric circuit.
Never use it to power any precise DC
instrument.
This generator is equipped with DC5V USB
by connecting it to the 5V USB charging
Important!
heating device far from the generator.
10
7.4 Switching off the engine
- Before you switch off the generator, allow
7.5 Overload cut-out for socket-outlets
Important!
generator.
Important!
If this happens, reduce the electric power you
are taking from the generator or remove any
defective connected appliances.
Important!
Defective overload cut-outs must be replaced
only by overload cut-outs of identical design
and with the same performance data. If
repairs are necessary, please contact your
customer service center.

8. Cleaning, maintenance and storage

8. Cleaning, maintenance and storage
Switch off the generator and pull the spark
plug boot from the spark plug before doing
any cleaning and maintenance work on the
equipment.
8.1 Cleaning
- Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
cloth or blow it with compressed air at low
pressure.