Selecting The Optimum Listening Area; Checking The Virtual Surround Effect - Yamaha YAS-71CU Owner's Manual

AIR SURROUND XTREME
Selecting the optimum listening area
You can select the optimum listening area from two modes.
Press AREA.
Each time you press
AREA,
NORMAL and WIDE modes
change alternately.
NORMAL
Select this to sharpen the sound effect.
"AREA NORMAL" appears in the front panel
display when NORMAL mode is selected.
NORMAL WIDE
WIDE
Select this to widen the optimal listening area.
,0,
~'il~
• The default setting is NORMAL.
• The setting is set for all the input sources.
Note
This operation is only available when surround mode is activated.
Checking the virtual surround effect
You can check the Virtual Surround effect using test tones produced from the speakers.
Press TEST to output the test tone.
The system outputs the test tone and the output channel of
the test tone appears in the front panel display.
TF':;T: .
.
-_.
~
Active (virtual)
speaker channel
The output channel of the test tone cycles through as
follows. Each channel outputs the test tone for about 2
seconds.
[
L
-.
r'
-.
F.:
-'
S1.d
+-
5L
+-
SF:
]
,0,
~'il~
To cancel test tone mode, press TEST again.
Note
The surround back virtual speaker is included in SL and SR.
20
En