Using The Samsung Smart Control - Samsung UA55HU7200 User Manual

Using the Samsung Smart Control

Samsung Smart Control makes it even easier and more convenient to use the TV. Pressing the
virtual remote control that allows you to easily enter digits, control content, and activate functions on the screen.
- We recommend using Samsung Smart Control at a distance of less than 6m. A usable distance may differ depending on
the wireless environmental conditions.
Pairing the Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via Bluetooth. Pair
Samsung Smart Control to the TV.
- Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the
- Remote control receiver's location may vary depending on the model.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may be due to insufficient
battery power.
If the problem persists, the Samsung Smart Control restore pairing with the TV.
1. Press both the
RETURN
more than 3 seconds.
- You have to control Samsung Smart Control apart from TV within
30cm ~ 40cm. But, you must place Samsung Smart Control toward
to TV's remote control receiver.
2. Connection image is appeared on the screen. And then, Samsung Smart
Control is connecting to TV automatically.
When you see this alarm icon on the screen
Following alarm icon indicates Samsung Smart Control's batteries are low. If the alarm icon
pops up, replace the batteries. Samsung recommends using alkaline batteries for a longer
operating life.
[HU7200-XY]BN68-06585A-ENG.indb 14
button and the button simultaneously for
GUIDE
English - 14
button displays a
KEYPAD
button to turn the TV on.
TV
<Low battery Alarm Icon>
2014-11-14 3:55:26