Adjusting The Projected Image - Dell M900HD User Manual

NOTE:
to allow the internal temperature to stabilize.
4
Disconnect the power cord from the electrical outlet and the projector.

Adjusting the Projected Image

Raising the Projector Height
1
Press the Elevator button.
2
Raise the projector to the desired display angle, and then release the
button to lock the elevator foot into position.
Lowering the Projector Height
1
Press the Elevator button.
2
Lower the projector, and then release the button to lock the elevator foot
into position.
1 Elevator button
2 Elevator foot (Angle of tilt: 0 to 9.6
degrees)
Downloaded From projector-manual.com DELL Manuals
Before you turn on the projector again, wait for 60 seconds
1
2
Using Your Projector 15