Page 1
HTZ-HW919BD Blu-ray Disc surround system | 藍光家庭影院組合 조조조조조조조조조조조 XV-BD919FS Blu-ray Disc receiver | 藍光接收器 S-BD919HW Speaker System | 揚聲器系統 S-BD808SW Speaker System (only subwoofer) | 揚聲器系統 操作手冊 P/NO: MFL67205105...
Page 2
Getting Started Safety Information VENTILATION CAUTION: When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side). CAUTION WARNING: Slots and openings in the cabinet are RISK OF ELECTRIC SHOCK provided for ventilation to ensure reliable operation DO NOT OPEN of the product, and to protect it from overheating. CAUTION: TO REDUCE THE RISK OF ELECTRIC To prevent fire hazard, the openings should SHOCK DO NOT REMOVE COVER (OR BACK) NO never be blocked or covered with items (such as USER-SERVICEABLE PARTS INSIDE REFER SERVICING newspapers, table-cloths, curtains) or by operating TO QUALIFIED SERVICE PERSONNEL. the equipment on thick carpet or a bed. Operating Environment: Operating environment This lightning flash with arrowhead temperature and humidity: +5 °C to +35 °C (+41 symbol within an equilateral triangle °F to +95 °F); less than 85 %RH (cooling vents not is intended to alert the user to the blocked) presence of uninsulated dangerous Do not install this unit in a poorly ventilated area, voltage within the product’s or in locations exposed to high humidity or direct enclosure that may be of sufficient magnitude to sunlight (or strong artificial light) constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the CAUTION: This product is a class 1 laser product battery from the equipment: Remove the classified under the Safety of laser products, old battery or battery pack, follow the steps IEC60825-1:2007. To ensure proper use of this in reverse order than the assembly. To prevent product, please read this owner’s manual carefully contamination of the environment and bring on and retain it for future reference. Shall the unit possible threat to human and animal health, the require maintenance, contact an authorized service old battery or the battery put it in the appropriate center. container at designated collection points. Do Use of controls, adjustments or the performance of not dispose of batteries or battery together with procedures other than those specified herein may other waste. It is recommended that you use result in hazardous radiation exposure. local, free reimbursement systems batteries and To prevent direct exposure to laser beam, do not try accumulators. The battery shall not be exposed to to open the enclosure. Visible laser radiation when excessive heat such as sunshine, fire or the like. open. DO NOT STARE INTO BEAM.
Getting Started Notes on Copyrights WARNING: To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) y Because AACS (Advanced Access Content on the equipment. System) is approved as content protection WARNING: Before plugging in for the first time, read system for Blu-ray Disc format, similar to use of the following section carefully.
Page 5
Getting Started Important Notice for TV colour system The colour system of this player differs according to currently playing discs. For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal. Only the multi system colour TV can receive all signals output from the player. y If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. y The multi system colour TV changes the colour system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen. y Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder.
Table of Contents Table of Contents 26 Connecting to your Home Network 26 – Wired network connection 27 – Wired Network Setup 29 USB device connection 29 – Playback content in the USB device Getting Started Safety Information System Setting Introduction – Playable Discs and symbols used in 30 Settings this manual 30 – Adjust the Setup Settings – About the “7” Symbol Display 30 – [DISPLAY] Menu – Supplied Accessories 32 – [LANGUAGE] Menu – Accessories of speaker box 32 – [AUDIO] Menu...
Page 7
Table of Contents 47 – Selecting a subtitle language 47 – Watching from a different angle 48 – Changing the TV Aspect Ratio 48 – Changing subtitle code page 48 – Changing the Picture Mode 49 Audio CD Recording 50 Playing the iPod 50 – Enjoying iPod on the screen – Enjoying the iPod IN mode 52 Radio Operations 52 – Presetting the Radio Stations 52 – Deleting a saved station 52 – Deleting all the saved stations 52 – Improving poor FM reception 53 Using the Online Troubleshooting 54 Troubleshooting...
Getting Started Introduction Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. y “Blu-ray 3D” discs y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Movie, Music or Photo files. y ISO 9660+JOLIET, UDF and UDF Bridge format y Discs such as movies that can be purchased or rented. y Video mode and finalized only DVD-ROM y Supports the dual layer disc also DVD-R DVD-RW Finalized AVCHD format DVD+R DVD+RW y DVD±R/RW discs that contain Movie, Music or (8 cm /...
Getting Started Note About the “7” Symbol Display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the specific media. unit. y Depending on the recording software & the Supplied Accessories finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. y BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens. y If you record a disc using a personal Video cable (1) Remote control (1) computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) Battery (1) FM antenna (1) y This player requires discs and recordings to...
Getting Started Note AVCHD (Advanced Video y The file name is limited to 180 characters. Codec High Definition) y Maximum files/folder: Less than 2 000 y This player can playback AVCHD format discs. (total number of files and folders) These discs are normally recorded and used in y Depending on the size and number of the camcorders. files, it may take several minutes to read the y The AVCHD format is a high definition digital contents on the media. video camera format. y File compatibility may differ depending on y The MPEG-4 AVC/H.264 format is capable of the server. compressing images at higher efficiency than y The file requirements on page 10 are not that of the conventional image compressing always compatible. There may have some format. restrictions by file features and media y This player can playback AVCHD discs using server’s ability. “x.v.Colour” format.
Getting Started Certain System Requirements Compatibility Notes For high definition video playback: y Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues y High definition display that has COMPONENT or are possible. If you experience compatibility HDMI input jacks. problems, please contact an authorized y BD-ROM disc with high definition content. Customer Service Center. y HDMI or HDCP capable DVI input on your display y This unit allows you to enjoy functions such device is required for some content (as specified as picture-in-picture, secondary audio and by disc authors). Virtual packages, etc., with BD-ROM supporting For playing files on your PC’s share folder via your BONUSVIEW (BD-ROM version 2 Profile 1 version home network, the PC requires below. 1.1/ Final Standard Profile). Secondary video and audio can be played from a disc compatible with y Windows® XP (Service Pack 2 or higher), the picture-in-picture function. For the playback Windows Vista® (no Service Pack required) method, refer to the instructions in the disc. Windows 7® (no Service Pack required) y Viewing high-definition content and up- y 1.2 GHz Intel® Pentium® III or AMD converting standard DVD content may require a Sempron™ 2200+ processors...
Getting Started Remote control X USB REC: Records an audio • • • • • • • • • a • • • • • • • INPUT/TUNER: Changes MUTE: Mute the unit. input mode. SOUND: Selects a sound effect 1 (STANDBY/ON): Switches the mode. player ON or OFF. VOL +/- : Adjusts speaker B OPEN/CLOSE: Opens and volume. closes the disc tray. • • • • • • • • • c • • • • • • • BT AUDIO: Changes input mode to BT AUDIO directly.
Getting Started Front panel STANDBY/ON OPEN/CLOSE FUNCTION TUNE VOLUME PORTABLE IN 500 mA a Disc Tray c Display Window b Operation buttons d Remote Sensor g h i j k 1 (STANDBY/ON) Button e PORTABLE IN STANDBY/ON OPEN/CLOSE FUNCTION Switches the player ON or OFF. f USB Port TUNE B (OPEN/CLOSE)
Connecting Assemble the speakers 2. Connect the wires to the player. Connect the white wire with gray line into (+) side and the other wire into (–) side. To connect the cable to the player, press each plastic finger Speaker Setup pad to open the connection terminal. Insert the wire and release the finger pad. Preparing the speakers Red (+) Red (+) 1. Attach the non-skid pads to the base of each speaker. For front speaker: White (+) White (+) Use the supplied adhesive to attach two pads Orange (+) Orange (+) to the base (bottom) of speaker. Non-skid pads Black (-) Black (–) > Caution y Do not connect any speakers other than those supplied to this system.
Black (–) the wall you intend to mount the speaker on is strong enough to support them. Do not mount on plywood or soft surface walls. y Mounting screws are not supplied. Use screws suitable for the wall material and support the 4. Mount on wall. weight of the speaker. > Caution y If you are unsure of the qualities and strength of the wall, consult a professional for advice. y Pioneer is not responsible for any accidents Wall or damage that result from improper mounting installation. screws (available commercially)* 1. Use a Phillips screwdriver to remove the two screws holding the stands to the speaker. 6 mm to 8 mm * Wall mounting screws are not included. Purchase appropriate screws taking into consideration the type of wall and the weight of the speaker system. Red (+) Open two holes in the wall 818 mm apart.
Connecting Additional notes on speaker Positioning the system Install the front speaker below the TV, in the center position. Precautions: y Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure. y The front speaker and subwoofer are not magnetically shielded and so should not be placed near a TV or monitor. Magnetic storage media (such as floppy discs and tape or video cassettes) should also not be kept close to the front speaker and subwoofer. y Do not attach the subwoofer to a wall or ceiling. They may fall off and cause injury. Front speaker: Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speaker. Turn it slightly toward the center of the room to reduce the wall reflections. Unit Listening position > Caution y Be careful to make sure children do not put their hands or any objects into the *subwoofer duct.
Connecting Connecting to Your TV HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Make one of the following connections, depending Speed HDMI™ Cable with Ethernet). Connect the on the capabilities of your existing equipment. HDMI jack on the player to the HDMI jack on a y HDMI connection (page 18) HDMI compatible TV or monitor. y Component Video connection (page 20) y Video connection (page 20) Note Rear of the unit y Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. y Please refer to the manuals of your TV, stereo system or other devices as necessary to make the best connections. y Make sure the player is connected directly HDMI to the TV. Tune the TV to the correct video cable input channel. y Do not connect your player via your VCR. The image could be distorted by the copy protection system.
Page 19
Connecting Note y If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. y When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 21.) y Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 31). y Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. y When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. y If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).
Connecting Component Video Connection Video Connection Connect the COMPONENT VIDEO OUT jacks on the Connect the VIDEO OUT jack on the player to the player to the corresponding input jacks on the TV video in jack on the TV using a video cable. You can using component video cable. You can hear the hear the sound through the system’s speakers. sound the through the system’s speaker. Rear of the unit Rear of the unit Video cable Component video cable Note When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 21.)
Connecting Antenna connection Resolution Setting The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUTPUT jacks. Connect the supplied antenna for listening to the You can change the resolution using [Setup] menu. radio. 1. Press HOME MENU (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. Rear of the unit 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. Note Note y If your TV does not accept the resolution After connecting the FM wire antenna, keep you have set on the player, you can set it as horizontal as possible. Be sure to fully resolution to 576p as follows: extend the FM wire antenna. 1. Press B to open the disc tray. 2 Press Z (STOP) for more than 5 seconds. y Since several factors affect the resolution of video output, see “Video Output Resolution”...
Connecting Connections with PORTABLE IN connection external device You can enjoy the sound from your portable audio player through the speakers of this system. Connect the headphones (or line out ) jack of the portable audio player into the PORTABLE IN socket AUX Connection of this unit. And then select the [PORTABLE] option by pressing INPUT/TUNER and ENTER (b). You can enjoy the sound from an external You can also use the FUNCTION button on the front component through the speakers of this system. panel to select the input mode. Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing VOLUME INPUT/TUNER and ENTER (b). You can also use the FUNCTION button on the front PORTABLE IN panel to select the input mode. 500 mA Rear of the unit MP3 Player, etc... White To the audio output jacks of your component (TV, VCR, etc.)
Connecting OPTICAL IN connection HDMI IN 1/2 connection You can enjoy the sound from your component You can enjoy the pictures and sound from your with a digital optical connection through the component through this connection. speakers of this system. Connect the HDMI OUT jack of your component Connect the optical output jack of your component into the HDMI IN 1 or 2 jack on this unit. And then into the OPTICAL IN jack on the unit. And then select the [HDMI IN 1/2] option by pressing INPUT/ select the [OPTICAL] option by pressing INPUT/ TUNER and ENTER (b). TUNER and ENTER (b). Or press OPTICAL to select You can also use the FUNCTION button on the front directly. panel to select the input mode. You can also use the FUNCTION button on the front panel to select the input mode. Rear of the unit Rear of the unit To the HDMI OUT jack of your component (set-top box, digital satellite receiver, video game To the digital machine, etc.) optical output jack of your component Note y You cannot change the video resolution in the HDMI IN 1/2 mode. Change the video resolution of the connected component.
Connecting Bluetooth® connection 1. Select the Bluetooth function by using the INPUT/TUNER or BT AUDIO. Appears “BT AUDIO” and then “BT READY” in About Bluetooth display window. Bluetooth® is wireless communication technology 2. Operate the Bluetooth device and perform the for short range connection. pairing operation. When searching for this unit with the Bluetooth device, a list of the devices The available range is within 10 meters. (The sound found may appear in the Bluetooth device may be interrupted when the connection interfered display depending on the type of Bluetooth by the other electronic wave or you connect the device. Your unit appears as “PIONEER AUDIO”. Bluetooth in the other rooms.) Connecting individual devices under 3. Enter the PIN code. Bluetooth wireless technology does not incur any PIN cord : 0000 charges. A mobile phone with Bluetooth wireless 4. When this unit successfully paired with your technology can be operated via the Cascade if Bluetooth device, "BT SINK" appears in the the connection was made via Bluetooth wireless display window. technology. Note Available Devices : Mobile phone, MP3, Laptop, Depending on the Bluetooth device type, PDA (This units be supported the Stereo Headset.) some device have a different pairing way.
Page 25
Connecting Note y This units dose not be supported the Mono Headset Profile (Hands Free Profile). y The sound may be interrupted when the connection interfered by the other electronic wave. y You cannot control the Bluetooth device with this unit. y Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. y Although the distance between your Bluetooth and the set is less than 10 m, there are obstacles between both, your Bluetooth device cannot be connected. y Depending on the type of the device, you may not be able to use the Bluetooth function. y When not connected the Bluetooth, “BT READY” appears on the display window. y The Electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected. y When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected. y If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower and lower the connection will disconnect when the space between the...
Connecting Connecting to your Home Network Broadband service This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as BD- LIVE interactivity and Online content services. Wired network connection Router Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. Please refer to the documentation for your network device for further instructions. Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable. PC and/or DLNA certified server Note y When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. y Do not connect a modular phone cable to the LAN port. y Since there are various connection Rear of the unit configurations, please follow the specifications of your telecommunication carrier or internet service provider.
Connecting Wired Network Setup 5. If you select [Test] and press ENTER (b) at step 4 above, the network connection status is If there is a DHCP server on the local area network displayed on the screen. (LAN) via wired connection, this player will You can also test it on the [Connection Status] automatically be allocated an IP address. After in the [Setup] menu. making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/D and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. 3. Select [OK] and press ENTER (b) to apply network settings. 4. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection.
Page 28
Connecting Notes on Network Connection: y A DSL modem is required to use DSL service and a cable modem is required to use cable modem y Many network connection problems during service. Depending on the access method of and set up can often be fixed by re-setting the subscriber agreement with your ISP, you may not router or modem. After connecting the player be able to use the internet connection feature to the home network, quickly power off and/ contained in this player or you may be limited or disconnect the power cable of the home to the number of devices you can connect at network router or cable modem. Then power on the same time. (If your ISP limits subscription to and/or connect the power cable again. one device, this player may not be allowed to y Depending on the internet service provider (ISP), connect when a PC is already connected.) the number of devices that can receive internet y The use of a “Router” may not be allowed or its service may be limited by the applicable terms usage may be limited depending on the policies of service. For details, contact your ISP. and restrictions of your ISP. For details, contact y Our company is not responsible for any your ISP directly. malfunction of the player and/or the internet y Turn off all unused network equipment in connection feature due to communication your local home network. Some devices may errors/malfunctions associated with your generate network traffic.
Connecting Note USB device connection y This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and This player can play movie, music and photo files NTFS when accessing files (music, photo, contained in the USB device. movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats Playback content in the USB are supported. Use the USB flash drive/ external HDD formatted in either FAT16 or device FAT32 when using BD-LIVE and Audio CD recording. 1. Insert a USB device to the USB port until it fits into place. y The USB device can be used for the local storage for enjoying BD-LIVE discs with Internet. VOLUME y This unit can support up to 8 partitions of the USB device. PORTABLE IN y Do not extract the USB device during 500 mA operation (play, etc.).
System Setting Settings [DISPLAY] Menu TV Aspect Ratio Adjust the Setup Settings Select a TV aspect ratio option according to your TV type. You can change the settings of the player in the [Setup] menu. [4:3 Letter Box] 1. Press HOME MENU (n). Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 2. Use A/D to select the [Setup] and press ENTER [16:9 Original] (b). The [Setup] menu appears. Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.
Page 31
System Setting Resolution HDMI Color Setting Sets the output resolution of the Component and Select the type of output from the HDMI OUT jack. HDMI video signal. Refer to page 21 and 62 for For this setting, please refer to the manuals of your details about the resolution setting. display device. [Auto] [YCbCr] If the HDMI OUT jack is connected to Select when connecting to a HDMI display TVs providing display information (EDID), device. automatically selects the resolution best suited [RGB] to the connected TV. Select when connecting to a DVI display [1080p] device. Outputs 1080 lines of progressive video. 3D Mode [1080i] Select the type of output mode for Blu-ray 3D disc Outputs 1080 lines of interlaced video. playback. [720p] [Off] Outputs 720 lines of progressive video. Blu-ray 3D disc playback will output as 2D [576p] mode like a normal BD-ROM disc playback. Outputs 576 lines of progressive video. [On] [576i] Blu-ray 3D disc playback will output as 3D Outputs 576 lines of interlaced video.
System Setting [LANGUAGE] Menu [AUDIO] Menu Display Menu Speaker Setup Select a language for the [Setup] menu and on- To obtain the best possible sound, use the speaker screen display. setup display to specify the volume of the speakers you have connected and their distance from your Disc Menu/Disc Audio/ listening position. Use the test to adjust the volume of the speakers to the same level. Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. [Other] Press ENTER (b) to select another language. Use number buttons then press ENTER (b) [Speaker] to enter the corresponding 4-digit number Select a speaker that you want to adjust. according to the language code list on page [Volume] Adjust the output level of each speaker. [Off] (Disc Subtitle only) Turn off Subtitle.
System Setting HD AV Sync [LOCK] Menu Sometimes Digital TV encounters a delay between The [LOCK] settings affect only Blu-ray Disc and picture and sound. If this happens you can DVD playback. compensate by setting a delay on the sound so To access the any features in [LOCK] settings, you that it effectively ‘waits’ for the picture to arrive: this must enter the 4-digit security code you have is called HD AV Sync. Use W/S to scroll up and created. down through the delay amount, which you can If you have not entered a password yet, you are set at anything between 0 and 300 ms. prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password. [None] Enter a 4-digit password twice, and press ENTER (b) to create a new password. DRC (Dynamic Range Control) [Change] Enter the current password and press ENTER This function allows you to listen to a movie at a (b). Enter a 4-digit password twice, and press lower volume without losing clarity of sound. ENTER (b) to create a new password. [Off] If you forget your password Turns off this function.
System Setting DVD Rating [NETWORK] Menu Blocks playback of rated DVD based on their The [NETWORK] settings are needed to use the BD- content. (Not all discs are rated.) Live and Online content services. [Rating 1-8] Connection Setting Rating one (1) has the most restrictions and If your home network environment is ready rating eight (8) is the least restrictive. to connect the player, the player needs to be set the wired network connection for network [Unlock] communication. (See “Connecting to your Home If you select [Unlock], parental control is not Network” on pages 26-28.) active and the disc plays in full. Connection Status Blu-ray Disc Rating If you want to check the network status on this Set an age limit of BD-ROM play. Use number player, select the [Connection Status] options and buttons to input an age limit for BD-ROM viewing. press ENTER (b) to check whether a connection to the network and the internet have been [255] established. All BD-ROM can be played. BD-LIVE connection [0-254] You can restrict Internet access when BD-LIVE Prohibits play of BD-ROM with corresponding...
System Setting [OTHERS] Menu Initialize [Factory Set] DivX® VOD You can reset the player to its original factory ABOUT DIVX VIDEO: DivX® is a digital video format settings. created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more [BD-LIVE Storage Clear] information and software tools to convert your files Initializes the BD-LIVE contents from the into DivX video. connected USB storage. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Note Certified® device must be registered in order to play If you reset the player to its original factory purchased DivX Video-on-Demand (VOD) movies. settings using [Factory Set] option, you have To obtain your registration code, locate the DivX to set all the activation for the Online services VOD section in your device setup menu. Go to vod. and network settings again. divx.com for more information on how to complete your registration. Software Information [Register] Displays the registration code of your player. Displays the current software version. [Deregister] Disclaimer Notice Deactivate your player and display the Press ENTER (b) to view the notice of Network deactivation code.
System Setting Sound Effect You can select a suitable sound mode. Press SOUND repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects. [STD]: You can enjoy comfortable and natural sound. [Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded. [Bass Blast]: Reinforce the bass sound effect from front left and right speaker and subwoofer. [Clear Voice]: This mode makes voice sound clear, improving the quality of voice sound. [Game]: You can enjoy more virtual sound while playing video games. [Night]: This may be useful when you want to watch movies at low volumes late at night. [Mus. ReTouch]: When listening to MP3 files or other compressed music, you can enhance the sound. This mode is available only to 2 channel sources. For Dolby Digital, Dolby Digital Plus and Dolby True HD, it is available to 2 channel and multichannel sources. [Loudness]: Improves bass and treble sound.
Operating General Playback Playing a Disc 1. Press B (OPEN/CLOSE), and place a disc on the Using [HOME] menu disc tray. The home menu appears when you press HOME 2. Press B (OPEN/CLOSE) to close the disc tray. MENU (n). Use W/S/A/D to select a category For the most Audio CD, BD-ROM and and press ENTER (b). DVD-ROM discs, playback starts automatically. 3. Press HOME MENU (n). 4. Select [Movie] or [Music] using A/D, and press ENTER (b). 5. Select [Blu-ray Disc], [DVD], [VR] or [Audio] option using W/S, and press ENTER (b). Note y Playback functions described in this manual are not always available in every files and media. Some functions can be restricted depending on many factors. a [Movie] - Plays video contents. y Depending on the BD-ROM titles, a USB b [Music] - Plays audio contents. device connection may be needed for the proper playback.
Operating Playing Blu-ray 3D disc Enjoying BD-Live™ This player can play the Blu-ray 3D discs which BD-ROM supporting BD-Live (BD-ROM version 2 contains separate views for the left and right eyes. Profile 2) that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this Preparation unit to the internet. In order to playback Blu-ray 3D title in 1. Check the network connection and settings stereoscopic 3D mode, you need to: (pages 26-28). y y y C heck your TV is 3D capable and has HDMI 2. Insert a USB storage device to the USB port on (3D) input(s). the front panel. y W ear 3D glasses to enjoy the 3D experience A USB storage device is needed to download if it is necessary. bonus content. y y y C heck whether the BD-ROM title is the Blu- 3. Press HOME MENU (n), and set the [BD-LIVE ray 3D disc or not.
Operating Playing a file on a network Entering a network user ID and the password server Depending on your PC’s environment, you may need to enter a network user ID and the password for accessing a shared folder. This player can play movie, music and photo files located in a PC or a DLNA server through your 1. The keyboard menu appears automatically if the home network. network user ID and the password are required. 1. Check the network connection and settings 2. Use W/S/A/D to select a character then (pages 26-28). press ENTER (b) to confirm your selection on the virtual keyboard. 2. Press HOME MENU (n). To enter a letter with an accent mark, press 3. Select [Movie], [Photo] or [Music] using A/D, DISPLAY (m) to display the extended character and press ENTER (b). set. 4. Select a DLNA media server or a share folder on your PC on the list using W/S, and press ENTER (b).
Operating Basic operations for video and Basic operations for photo audio content content To stop playback To play a slide show Press Z (STOP) while playback. Press d (PLAY) to start slide show. To pause playback To stop a slide show Press M (PAUSE/STEP) while playback. Press Z (STOP) while slide show. Press d (PLAY) to resume playback. To pause a slide show To play frame-by-frame (Video) Press M (PAUSE/STEP) while slide show.
Operating Resume playback eroyt, The unit records the point where you pressed the Z (STOP) depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point). If you press Z (STOP) twice or unload the disc, “Z(Complete Stop)” appears on the screen. The unit will clear the stopped point. Note y The resume point may be cleared when a button is pressed (for example; 1 (STANDBY/ON), B (OPEN/CLOSE), etc). y On BD-ROM discs with BD-J, the resume playback function does not work. y If you press Z (STOP) once during BD-ROM interactive title playback, the unit will be in Complete Stop mode .
Operating Advanced Playback Repeating a specific portion erot This player can repeat a portion you have selected. Repeat Playback 1. While playback, press REPEAT (h) to select erotu [A-] at the beginning of the portion you wish to repeat. During playback, press REPEAT (h) repeatedly to 2. Press ENTER (b) at the end of the portion. Your select a desired repeat mode. selected portion will be repeated continually. Blu-ray Disc/DVDs 3. To return to normal playback, press REPEAT jA- – Selected portion will be repeated continually. (h) repeatedly to select [Off ]. jChapter – The current chapter will be played Note back repeatedly. y You cannot select a portion less than 3 jTitle – The current title will be played back seconds. repeatedly. y This function may not work on some disc or title. To return to normal playback, press REPEAT (h) repeatedly to select [Off ].
Operating Marker Search Using the search menu eroy eroy You can start playback from up to nine memorized Using search menu, you can easily to find the point points. where you want to start playback. To enter a marker To search a point 1. While playback, press MARKER at the desired 1. During playback, press SEARCH to display the point. The Marker icon appears on the TV screen search menu. briefly. 2. Repeat step 1 to add up to nine markers. To recall a marked scene 2. Press A/D to skip the playback 15 seconds forward or backward. You can select a point that 1. Press SEARCH and the search menu appears on you want to skip by pressing and holding the screen.
Operating Selecting a subtitle file Last Scene Memory If the subtitle file name is different from the movie This unit memorizes the last scene from the last disc file name, you need to select the subtitle file on the that is viewed. The last scene remains in memory [Movie] menu before playing the movie. even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene 1. Use W/S/A/D to select the subtitle file you memorized, the scene is automatically recalled. wish to play in the [Movie] menu. Note 2. Press ENTER (b). y Last Scene Memory function for a previous disc is erased once a different disc is played. y This function may not work depending on the disc. y On BD-ROM discs with BD-J, the last scene memory function does not work. y This unit does not memorize settings of a disc if you switch off the unit before commencing to play it. Press ENTER (b) again to deselect the subtitle file. Selected subtitle file will be displayed when you play the movie file. Note y If you press Z (STOP) while playback, the subtitle selection is cancelled.
Operating Options while viewing a photo Listening to music while slide show You can use various options during viewing a photo in full screen. You can display photo files while listening to music 1. While viewing a photo in full screen, press files. DISPLAY (m) to display the option menu. 1. While viewing a photo in full screen, press 2. Select an option using W/S. DISPLAY (m) to display the option menu. 2. Use W/S to select [Music Select] option, and press ENTER (b) to display the [Music Select] menu. 3. Use W/S to select a device, and press ENTER (b). Device that you can select are differ depending on the location of the photo file you are displaying in full screen. Photo location Available Device Disc, USB Disc, USB a Current photo/Total number of photos Share Folder (PC) Share Folder (PC)
Operating On-Screen display 2. Select an option using W/S. 3. Use A/D to adjust the selected option value. 4. Press RETURN (x) to exit the On-Screen You can display and adjust various information and display. settings about the content. Note Displaying content information y If no button is pressed for a few seconds, the on-screen display disappears. on-screen y A title number cannot be selected on some eroy discs. y Available items may differ depending on 1. While playback, press DISPLAY (m) to show discs or titles. various playback information. y If an interactive Blu-ray Disc is playing back, some setting information is displayed on the screen but prohibited to be changed. a Title – current title number/total number of titles b Chapter – current chapter number/total number of chapters c Time – elapsed playing time/total playback time d Audio – selected audio language or channel...
Operating Playing from selected time Selecting a subtitle language eroy eroy 1. Press DISPLAY (m) during playback. The time 1. During playback, press DISPLAY (m) to display search box shows the elapsed playing time. the On-Screen display. 2. Select the [Time] option and then input the 2. Use W/S to select the [Subtitle] option. required start time in hours, minutes, and 3. Use A/D to select desired subtitle language. seconds from left to right. 4. Press RETURN (x) to exit the On-Screen For example, to find a scene at 2 hours, 10 display. minutes, and 20 seconds, enter “21020”. Note Press A/D to skip the playback 60 seconds Some discs allow you to change subtitle forward or backward. selections only via the disc menu. If this is the 3. Press ENTER (b) to start playback from selected case, press POPUP/TOP MENU or MENU button time. and choose the appropriate subtitle from the Note selections on the disc menu.
Operating Changing the TV Aspect Ratio Changing the Picture Mode eroy eroy You can change the TV aspect ratio setting while You can change the [Picture mode] option while playback. playback. 1. During playback, press DISPLAY (m) to display 1. During playback, press DISPLAY (m) to display the On-Screen display. the On-Screen display. 2. Use W/S to select the [TV Aspect Ratio] 2. Use W/S to select the [Picture Mode] option. option. 3. Use A/D to select desired option. 3. Use A/D to select desired option. 4. Press RETURN (x) to exit the On-Screen 4. Press RETURN (x) to exit the On-Screen display. display. Setting the [User] option Note 1. During playback, press DISPLAY (m) to display Even if you change the value of the [TV Aspect...
Operating Audio CD Recording press ENTER (b) while [OK] is selected. 8. Use W/S/A/D to select [OK], and press ENTER (b) to start Audio CD recording. You can record one desired track or all of the tracks If you want to stop in progressing Audio CD in Audio CD to a USB storage device. recording, press ENTER (b) while [Cancel] is 1. Insert a USB storage device to the USB port on highlighted. the front panel. 9. A message appears when Audio CD recording is 2. Press B (OPEN/CLOSE), and place an Audio CD completed. Press ENTER (b) to check the audio on the disc tray. file created in the destination folder. Press B (OPEN/CLOSE) to close the disc tray. Note The playback starts automatically. y The table below shows the average 3. Press DISPLAY (m) to display the option menu. recording time from an music track with 4 minutes of playback time to a audio file with Press X USB REC button on the remote control. 192 kbps as an example. You can record all musics in the audio CD. stop mode while playback 4. Use W/S to select [CD Recording] option, and 1.4 min. 2 min.
Operating Playing the iPod 2. Select a file using W/S/A/D, and press ENTER (b) to play the file. You can enjoy the sound with your iPod. For details Enjoying iPod on the screen about iPod, refer to the iPod’s User Guide. 1. Connect the iPod firmly. Preparation 2. Press HOME MENU (n). y To view iPod’s Videos and Photos on the TV 3. Select [Music] or [Movie] using A/D, and press screen. ENTER (b). - Be sure to use the video connection through If you connected the other device the VIDEO OUT jack on the rear panel of this (CD or USB), select the iPod on the menu. unit. Select the appropriate video input mode 4. Select a content using W/S/A/D, and press on the TV. ENTER (b) to play. - Depending on the iPod, make sure that select Videos > Video settings, and then set TV Out to Ask or On from your iPod. For details about Video Settings, refer to the iPod User Guide.
Compatibility with your iPod may vary Skip the playback forward or depending on the type of your iPod. backward . y iPod touch and iPhone have any difference To select a desired repeat in operation other than iPod. You may need REPEAT mode: Track (;), All (k), Off any additional control to use them with this (No display). unit. (e.g. “slide to unlock”) Note y If you use an application, make a call, or This system is compatible with the audio and send and receive SMS text message, etc. on video of the iPod (4th generation), iPod nano, iPod touch or iPhone, disconnect it from iPod classic, iPod mini, iPod touch and iPhone iPod dock of this unit and then use it. (iPod shuffle is not supported.). y This unit has been developed and tested for the software version of iPod/iPhone indicated on the website of Pioneer. y Installing software versions other than indicated on the website of Pioneer to your iPod/iPhone may result in incompatibility with this unit. y The video quality depends on the video sources on your iPod. y If you have a problem with your iPod, please visit www.apple.com/support/iPod.
Operating Radio Operations Deleting a saved station 1. Press PRESET (W/S) to select a preset number you want to delete. Be sure that the antennas are connected. (Refer to the page 21) 2. Press CLEAR, the preset number will blink in the display window. Listening to the radio 3. Press CLEAR again, to delete the selected preset number. 1. Press INPUT/TUNER until TUNER (FM) appears in the display window. The last received station is tuned in. Deleting all the saved stations 2. Press and hold TUNE (-/+) for about two Press and hold CLEAR for two seconds. seconds until the frequency indication starts to “ERASE ALL” will flash up. Press CLEAR again. Then all change. Scanning stops when the unit tunes in the saved stations are deleted. a station. Or Press TUNE (-/+) repeatedly. 3. Adjust the volume by rotating VOLUME on Improving poor FM reception the front panel or by pressing VOL (+/-) on the remote control.
Operating Using the Online You can use various content services via Internet with the Online feature. 1. Check the network connection and settings (pages 26-28). 2. Press HOME MENU (n). 3. Select the [Online] using A/D, and press ENTER (b). 4. Select an Online service using A/D, and press ENTER (b). Note y Detailed information of each service, contact to the content provider or visit support link of the service. y The content of Online services and service related information, including user interface, is subject to changes. Please refer to the web site of each service for most up-to-date information. y Please note that the related privacy policy will be applied to your privacy and legal rights of you when you provide the online services with user names, passwords, or other login information or personal information and when Pioneer stores them. Please refer to Pioneer Privacy Policy on the WEB site.
Troubleshooting Troubleshooting General Symptom Cause & Solution The Power does not turned on. y Plug the power cord into the wall outlet securely. The unit does not start y Insert a playable disc. (Check the disc type, colour system, and playback. regional code.) y Place the disc with the playback side down. y Place the disc on the disc tray correctly inside the guide. y Clean the disc. y Cancel the Rating function or change the rating level. The angle cannot be changed. y Multi-angles are not recorded on the DVD Video being played. Cannot play movie, photo or y The files are not recorded in a format that the unit can play. music files. y The unit does not support the codec of the movie file. The remote control does not y The remote control is not pointed at the remote sensor of the unit. work properly. y The remote control is too far from the unit. y There is an obstacle in the path of the remote control and the unit. y The batteries in the remote control are exhausted.
Troubleshooting Network Symptom Cause & Solution BD-LIVE feature does not work. y The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. y Ensure that the unit is correctly connected to the local area network and can access the internet (see page 26-28). y Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. y The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. Streaming video services (such y Your broadband service speed may not be fast enough to stream as YouTube™, etc.) are often video services. Contact your Internet Service Provider (ISP) and stopped or “buffer” during increase the broadband speed is recommended. playback. Shared folder or files from your y The firewall or anti-virus software on your media server is running. PC or a media server are not Turn off the firewall or anti-virus software running on your PC or displayed on the device list. media server. y The player is not connected to the local area network that your PC or the media server are connected.
Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts. y The player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection. Picture noise appears y You are playing a disc recorded in a colour system that is different from your TV. y Set the resolution which your TV accepts. Blu-ray 3D disc playback does y Connect the player to your TV with HDMI cable (Type A, High Speed not output 3D views. HDMI™ Cable with Ethernet). y Your TV may not support “HDMI 3D mandatory format”. y The [3D Mode] option in the [Setup] menu is set to [Off ]. Set the option to [On]. Sound Symptom Cause & Solution There is no sound or the sound y The unit is in scan, slow motion, or pause mode. is distorted. y The sound volume is low. y Check the speaker cable connection. (page 15) Updates Note that information on this product is available on the Pioneer website. Please check the website for information on updating or servicing this player.
TV the Supplied Remote You can operate your TV with the supplied remote Control control. If your TV is listed in the table below, set the appropriate manufacturer code. You can control your TV using the buttons below. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). TV Control Buttons Manufacturer Code Number Pioneer 1 (Default) Sony 2, 3 By pressing You can Panasonic 4, 5 Turn the TV on or off. 1 (TV POWER) Samsung 6, 7 Switch the TV’s input source 8, 9 INPUT between the TV and other 2. Release the 1 (TV POWER) button to complete...
Appendix Area Code List Choose an area code from this list. Area Code Area Code Area Code Area Code Afghanistan Fiji Monaco Singapore Mongolia Slovak Republic Argentina Finland Slovenia Australia France Morocco Austria Germany Nepal South Africa Belgium Great Britain Netherlands South Korea Bhutan Greece Antilles Spain Bolivia Greenland New Zealand Sri Lanka Hong Kong Nigeria...
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. Language Code Language Code Language Code Language Code Afar 6565 French 7082 Lithuanian 7684 Sindhi 8368 Afrikaans 6570 Frisian 7089 Macedonian 7775 Singhalese 8373 Malagasy 7771 Slovak 8375 Albanian 8381 Galician 7176 Slovenian 8376 Ameharic 6577 Georgian...
Page 61
Apple Inc., registered in the U.S. and other countries. ® Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners. YouTube™ is a trademark of Google Inc. Picasa™ Web Albums is a trademark of Google Inc. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
Appendix Video Output Resolution When the non-copy protected media is playing back Video Out COMPONENT VIDEO OUT HDMI OUT Resolution HDMI connected HDMI disconnected 576i 576p 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080i 1080p/24 Hz 1080p / 24 Hz 576i 1080i 1080p / 50 Hz 1080p / 50 Hz 576i...
Appendix Specifications General Power requirements AC 110-240 V, 50/60 Hz Power consumption 85 W (In Standby mode: Less than 0.3 W) Dimensions (W x H x D) Approx. 430 x 64 x 304 mm Net Weight (Approx.) 3.4 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 85 % Inputs/Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 HDMI IN/OUT (video/audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL IN (OPTICAL) 3 V (p-p), Optical jack x 1 PORTABLE IN 0.5 Vrms (3.5 mm stereo jack) Tuner FM Tuning Range 87.5 to 108.0 MHz Amplifier Power output (RMS) Total 560 W Front 180 W × 2 (1 kHz, 4 Ω, THD 10 %) Sub-Woofer 200 W (100 Hz, 3 Ω, THD 10 %) System Laser Semiconductor laser...
Page 64
Appendix Speakers for HTZ-HW919BD S-BD919HW y Front speaker Net Dimensions Type 2 Way 900 x 66 x 93 mm (W x H x D) Impedance Rated 4 Ω Net Weight 1.6 kg S-BD808SW y Subwoofer Net Dimensions Type 1 Way 130.5 x 420 x 375 mm (W x H x D) Impedance Rated 3 Ω Net Weight 4.4 kg y Design and specifications are subject to change without notice.
Appendix Maintenance Notes on Discs Handling Discs Handling the Unit Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the When shipping the unit disc. Please save the original shipping carton and Storing Discs packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was After playing, store the disc in its case. Do not originally packed at the factory. expose the disc to direct sunlight or sources of heat Keeping the exterior surfaces clean and never leave it in a parked car exposed to direct sunlight. y Do not use volatile liquids such as insecticide spray near the unit. Cleaning Discs y Wiping with strong pressure may damage the surface. Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, y Do not leave rubber or plastic products in clean the disc with a clean cloth. Wipe the disc from contact with the unit for a long period of time.
Software License Relating to Network Notice Services The licenses for the open source software used on this player can be found at the end of this All information, data, documents, communications, document. downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it originated. The availability of and access to Content and Services furnished by the Service Provider through the PIONEER Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services. Should you have any inquiry or problem related to the Content or Services, you may refer to the Service Provider’s website for the most up-to-date information. PIONEER is neither responsible nor liable for customer service related to the Content and Services. Any question or request for service relating to the Content or Services should be made directly to the respective Content and Service Providers. Please note that PIONEER is not responsible for any Content or Services provided by the Service Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such Content or Services.
Page 74
快速入門 簡介 可播放的碟片及本手冊用到的符號 媒體/術語 標章 符號 說明 y 電影碟片可以透過購買或租借。 y 「Blu-ray 3D」碟片 y 以 BDAV 格式錄寫的 BD-R/RE。 Blu-ray y 內有音樂標題、電影、音樂或照片檔案的 BD-R/RE碟片 y ISO 9660+JOLIET、UDF 及 UDF Bridge 格式 y 可購買或租借的影片碟片。 y 僅限影像模式及完成 DVD-ROM y 亦支援雙層碟片 DVD-R 最終版 AVCHD 格式 DVD-RW DVD+R DVD+RW y 載有影片、音樂或相片檔案的 DVD±R/RW 碟片。 (8公分, 12 公分) y ISO 9660+JOLIET、UDF 及 UDF Bridge 格式 DVD-RW VR 模式及限最終版 (VR) (8公分, 12 公分)...
Page 75
快速入門 注意 關於顯示的「 7 」符號 y 某些 CD-R/RW(或 DVD±R/RW)碟片可 您在操作電視機時可能會顯示「 7 」符號, 能無法在本機播放,視錄寫設備的條件 代表該特定媒體上無法使用本使用手冊所述功 或 CD-R/RW(或 DVD±R/RW)碟片本身 能。 而異。 y 某些錄好的碟片(CD-R/RW、 隨附的配件 DVD±R/RW、BD-R/RE)可能無法播放 ,視錄寫軟體及最終製作而異。 y 以個人電腦或 DVD/CD 錄寫器錄製的 BD-R/RE、DVD±R/RW 及 CD-R/RW 碟片 如有損壞或髒污、或播放器鏡頭有髒污 或水氣時將無法播放。 y 用個人電腦錄製的碟片,即使格式相 容,仍可能因錄製軟體的設定問題而無 視訊線(1) 遙控器(1) 法播放。(詳情請洽軟體供應商。) y 本播放器所用的碟片及其錄製方式,須 符合某些技術標準才能達到最佳的播放 品質。 y 預錄的 DVD 會自動設定到這些標準值。 可錄寫碟片格式的類型很多(包括載有 電池(1) FM天線(1) MP3或 WMA 檔案的 CD-R),因此必須...
Page 77
快速入門 > 注意 AVCHD(進階高畫質影片編碼 y 檔案名稱限制為 180 個字符。 器) y 最多檔案/資料夾:少於2000(檔案與 y 本播放器可播放 AVCHD 格式的光碟。通常 資料夾總數) 在攝影機內錄製及使用這些光碟。 y 讀取媒體內容可能耗時幾分鐘的時間, y AVCHD格式為高畫質數位影片相機格 視檔案大小及數量而異。 式。 y 檔案相容性可能因伺服器而異。 y MPEG-4 AVC/H.264 格式能以較傳統影像壓 y 頁 10 的檔案需求不一定都相容。可能存 縮格式更有效的方式壓縮影像。 在某些檔案功能及媒體伺服器性能導致 y 本播放器可使用「x.v.Colour」的格式播放 的限制。 AVCHD 光碟。 y 本播放器不支援播放電影字幕檔案。 y 視錄製設定,部分AVCHD 格式的光碟可能 y 媒體伺服器上的 USB 或 DVD 等行動裝 無法播放。 置的檔案可能無法分享。 y AVCHD格式的光碟需進行最終化處理。 y 本播放器不支援內嵌 ID3 Tag 的 MP3 檔...
Page 78
快速入門 系統需求 相容性注意事項 播放高畫質影片: y 由於BD-ROM是新的格式,可能發生無法播 放光碟、數位連線及其他相容性的問題, y 有色差端子或HDMI 輸入孔的高畫質顯示 若您遇到相容性的問題,請洽詢授權客服中 器。 心.。 y 有高畫質內容的BD-ROM 光碟。 y 本錄影機備有 BD-ROM,支援 BONUSVIEW y 在播放部分內容時,您的顯示裝置上需有 (BD-ROM 版本 2 設定檔 1 版本 1.1 / 最終標 HDMI或HDCP capable DVI輸入埠(光碟作者 準設定檔),讓您享用畫中畫、第二音頻及 會指定)。 虛擬包裝等多種功能。第二視訊及音訊可自 經由家庭網路播放 PC 共享資料夾內檔案時, 與子母畫面功能相容的碟片播放。請參考碟 您的 PC 需具備下列條件: 片上有關播放方式的說明。 ® y Windows XP (SP2), y 檢視高清內容或上轉標準 DVD 內容前,顯 ® Windows Vista (無需任何 SP), 示裝置上須有 HDMI 輸入或 HDCP DVI 輸入 ® Windows 7 (無需任何 SP) 能力。...
Page 80
快速入門 前面板 STANDBY/ON OPEN/CLOSE FUNCTION TUNE VOLUME PORTABLE IN 500 mA a 光碟托盤 c 顯示視窗 b 操作鈕 d 遙控器感應器 g h i j k 1 (STANDBY/ON) 鈕 e 便攜式裝置輸入 STANDBY/ON OPEN/CLOSE FUNCTION 開啟或關閉播放器。 TUNE USB 埠 B (OPEN/CLOSE) g 音量控制...
Page 81
連接 組裝揚聲器 2. 將揚聲器線連接至播放機上。 將有灰色線條的白線連接至 (+)側,而另一 條則連接至 (–)側。在將揚聲器線連接至 播放機上時,先按壓各個塑膠指壓固定墊以 揚聲器設定 打開連接端子。跟著將線插入並放開指壓固 定墊。 準備揚聲器 1. 把防滑墊貼附在每個揚聲器的底部。 Red (+) 紅色 (+) 前置揚聲器: 使用隨附的黏貼,把 2 個防滑墊貼在每個揚 聲器的底部。 White (+) 白色 (+) Orange (+) 橙色 (+) 防滑墊 Black (–) 黑色 (-) > 小心 y 切勿連接任何並非專為本系統所提供的 對於重低音揚聲器: 揚聲器。 請利用隨附的黏著劑將四個大型防滑墊安裝 y 切勿將隨附的揚聲器連接至並非隨本系 至重低音的底部。 統所提供的擴音器上,否則將有可能導 Red (+) 致系統故障或起火。...
Page 82
安裝前 y 請謹記,揚聲器系統非常重,它的重量可能 按住直到“咔嗒”一聲 會令螺絲鬆開,或牆身的物料不能承受,而 令到揚聲器掉下。請確保牆身能夠承受揚聲 器重量。請勿在夾板或軟的牆身上安裝。 Black (–) y 沒有附送掛牆螺絲釘。使用適合牆身物料使 用以及能夠承受揚聲器重量的螺絲。 > 小心 y 如果您對牆身的承受力以及質素不肯定 4. 在牆上安裝。 ,請向專業人士詢問意見。 y Pioneer 對不正確安裝所引起的意外或損 毀不負上任何責任。 1. 使用 Phillips 的螺絲刀移除揚聲器底座上的 兩顆螺絲。 掛牆支架螺 絲(可另外 購買)* 6 mm 至 8 mm * 沒有附送掛牆螺絲釘。購買適當的螺絲,考慮牆 2. 使用步驟 1 中的螺絲,將掛牆支架安裝至揚 壁類型以及揚聲器系統的重量。 聲器。 Red (+) 在牆壁上鑽上兩個相距 818mm 的洞。 White (+) Orange (+) Black (–)
Page 83
連接 在揚聲器擺放上之補充說明 擺放系統 在電視下的中央位置安裝前置揚聲器。 注意事項: y 請確保已綑好所有剩餘的電線並已完全插進 揚聲器插口。如果剩餘的電線接觸到背面板 ,可能會因安全措施導致電源中斷。 y 前置揚聲器和低音揚聲器並沒有防磁設計, 應放在距離電視機或螢幕的較遠位置。磁性 儲存媒體 (例如磁片和錄影帶) 應放在距離前 置揚聲器和低音揚聲器的較遠位置。 y 請勿把低音揚聲器安裝在牆上或天花板上。 否則可能會掉下令人受傷。 前置揚聲器: 低音揚聲器: 低音揚聲器的位置不太重要,因為低音聲響並 非極有指向性。但把低音揚聲器放近前置揚聲 器則較為理想。把它稍為面向房間的中心,這 有助減少牆壁的回音。 裝置 聆聽位置 > 小心 y 請確保兒童不會把手指或任何物件插進 *低音揚聲器聲管。 *低音揚聲器聲管:低音揚聲器機殼 (外 殼) 輸出豐厚低音的小孔。 y 揚聲器含有磁鐵部件,因此電視螢幕或 電腦螢幕畫面的顏色可能會不正常。請 把揚聲器放到遠離電視螢幕或電腦螢幕 的位置。...
Page 84
連接 連接至您的電視機 HDMI 連線 若您使用HDMI 電視機或顯示器,則可使用 HDMI線(類型 A,附乙太網路的高速HDMI™ 視您現有設備的功能,使用以下其中一項連接 排線)連接至本播放器。連接播放器的HDMI孔 方式。 至HDMI相容電視機或顯示器的HDMI孔。 y HDMI連線(第 18頁) y 色差端子連線(第 20 頁) y 視訊連接(第 20 頁) 機組背面 注意 y 視您要連接的電視機及其他設備,有多 種連接播放器的方式。僅使用本手冊所 說明的其中一種連線方式。 y 請參見您的電視機、立體聲系統或其他 裝置的手冊,建立最佳的連接方式。 y 確認播放器直接連至電視機。將電視機 轉至正確的視訊輸入頻道。 HDMI y 請勿透過您的VCR連接播放器。版權保 線 電視機 護系統會扭曲影像內容。 設定電視機的訊號來源為HDMI(請參見電視機 的使用手冊)。 HDMI 的額外資訊 y 連接 HDMI 或 DVI 相容裝置時,請確認以下 內容: - 嘗試關閉 HDMI/DVI 裝置與本播放器。 接著,開啟 HDMI/DVI 裝置並運行30 秒...
Page 85
連接 注意 y 若相連的 HDMI 裝置不接受播放器的聲 音輸出內容,則可能扭曲 HDMI 裝置的 聲音或無法輸出。 y 使用 HDMI 連線時,可變更 HDMI 輸出 的解析度。(請參見第 21 頁「解析度設 定」。) y 透過 [設定] 功能表的 [HDMI色彩設定] 選項,選擇使用 HDMI 輸出孔影片輸出 的類型(請參見第 31 頁)。 y 在已建立連線的情況下變更解析度,可 能造成故障。將播放器從新啟動,即可 解決此問題。 y 當 HDCP 與 HDMI 無法確認連線時,電 視機的螢幕會變黑。此時應檢查 HDMI 連線,或取下 HDMI 線。 y 若螢幕上有雜訊或線條,請檢查 HDMI 線(最大長度限制為 4.5m)。...
Page 86
連接 色差端子連線 視訊連接 使用色差端子線連接播放器上的色差端子輸出 使用視訊線,連接播放器上的視訊輸出 COMPONENT VIDEO OUT VIDEO OUT )孔,至電視機 )孔至電視機的影片輸入孔。可 上相對應的輸入孔。 透過系統的喇叭來聆聽聲音。 可透過系統的喇叭來聆聽聲音。 機組背面 機組背面 視訊 色差端子視訊線 電視機 電視機 注意 使用色差端子輸出連線時,可變更輸出內 容的解析度。(請參見第 21 頁的「解析度 設定」。)...
Page 87
連接 連接天線 解析度設定 HDMI OUT 播放器提供多種HDMI輸出 ( )與色 COMPONENT VIDEO OUT 差端子輸出 ( )孔 連接隨附的天線以收聽廣播。 的輸出解析度設定值。您可使用 [設定]功能表 變更解析度。 1. 按下 HOME MENU ( n )。 2. 使用 A/D 選擇[設定],並按下 ENTER ( b ) 。出現 [設定]功能表。 3. 使用 A/D 選擇[設定],並按下 ENTER ( b ) 。出現 [設定]功能表。 4. 使用 W/S ,選擇 [解析度] 選項,再按下 ENTER ( b ),移動到第三層。 機組背面 5. 使用 W/S ,選擇要使用的解析度,再按下 注意...
Page 88
連接 連接外部裝置 連接 PORT.IN 孔 可透過本系統的喇叭來欣賞可攜式聲音播放器 的音樂。 連接 AUX 連接可攜式聲音播放器的耳機(或 line out ) 孔至本機的 PORTABLE IN 孔。按下 INPUT/ 可透過本系統的喇叭來欣賞外部裝置的聲音。 TUNER 及 ENTER ( b ) ,選擇 [PORTABLE] 選 連接裝置的類比聲音輸出孔至本機上的 AUX 項。 L/R (INPUT)。按下 INPUT/TUNER 及 ENTER 亦可使用前面板上的 FUNCTION 鈕來選擇輸入 ( b ) ,選擇 [AUX] 選項。 模式。 亦可使用前面板上的 FUNCTION 鈕來選擇輸入 模式。 VOLUME PORTABLE IN 機組背面 500 mA 白色 紅色 MP3 播放器等… 至電視機、VCR 等裝置的 聲音輸出孔...
Page 89
連接 連接 OPTICAL IN 孔 連接 HDMI IN 1/2 可透過本系統的喇叭,使用數位光纖連線的方 可使用此連接方法,欣賞外部裝置上的影音內 式來欣賞其他裝置上的音樂。 容。 連接外部裝置上的光纖輸出孔至本機的 連接外部裝置的 HDMI OUT 孔至本機的 HDMI IN 1 或 2孔。按下 INPUT/TUNER 及 ENTER ( b ) OPTICAL IN孔。按下 INPUT/TUNER 及 ENTER ( b ) ,選擇 [OPTICAL] 選項。或是直接按下 ,選擇 [HDMI IN 1/2] 選項。 OPTICAL 來選擇。 亦可使用前面板上的 FUNCTION 鈕來選擇輸入 亦可使用前面板上的 FUNCTION 鈕來選擇輸入 模式。 模式。 機組背面 機組背面 至機上盒、數位衛 星接收器、電視遊 戲機等外部裝置的 至外部裝置上的數 HDMI OUT 孔 位光纖輸出孔 注意 y 不可變更 HDMI IN 1/2 模式裡的影片解 析度。變更相連裝置的影片解析度。 y 若電腦接至 HDMI IN 1/2 孔時出現視訊 輸出訊號異常的情況,請變更電腦的解 析度為 576p、720p、1080i 或 1080p。 y 無法從色差或視訊輸出埠來輸出 HDMI input 的視訊訊號。...
Page 91
連接 注意 y 注意 y 本設備並不支援「單聲道耳機協定規格 」 (免持協定規格) y 當連線受到其他電波干擾時,聲音可能 會因此中斷。 y 您不能利用本設備控制藍芽裝置。 y 藍芽裝置與設備的配對功能僅限於一對 一,不支援多重配對。 y 雖然您的藍芽裝置與本組設備之間距離 少於 10 公尺,但兩者之間仍有許多障礙 ,因此您的藍芽裝置無法連線。 y 視裝置的型式而定,您可能會無法使用 藍芽功能。 y 當藍芽裝置無法連線時,在顯示窗上會 出現「BT READY」字樣。 y 當電氣功能因為醫療設備、微波爐或無 線網路裝置等使用相同頻率的裝置造成 故障時,連線即會中斷。 y 當有人站在藍芽裝置與播放機之間並因 此阻斷通訊時,連線即會中斷。 y 藍芽裝置與本設備之間相距愈遠,音質 就會愈低,而當藍芽裝置與本設備之間 相隔超出藍芽的操作範圍時,連線即會 中斷。 y 使用藍芽無線技術的裝置在您將主機關 掉或將該裝置擺在距離主機超過 10 公尺...
Page 92
連接 連接至您的家用網路 本播放器可以透過後面板的區域網路 (LAN) 接 寬頻服務 口連接區域網路。 把播放器連接至寬頻家居網路,就可以使用各 種服務,例如 BD-Live 互動及線上服務。 有線網路連線 使用有線網路直接連接裝置到網路, 不受到無線電頻率的干擾,可提供最佳效能。 請參見您的網路裝置手冊,瞭解相關詳情。 路由器 用另購的網路線將播放器的 LAN 連接埠連上數 據機或路由器上相對應的連接埠。 注意 y 插入或拔除網路線時,必須握住網路線 的插頭處。拔除網路線時,請勿拉扯網 路線,而是壓下卡榫再拔除。 y 勿連接模組化電話線至網路埠。 PC 及/或 DLNA 認證的伺服器 y 由於有多種連線設定方式,請按照電信 業者或網路服務提供商的規格操作。 y 若您要存取電腦或 DLNA 伺服器內的內 容,則必須透過路由器將本播放器與這 些裝置連接在同一區域網路內。 機組背面...
Page 93
連接 設定有線網路 5. 若您在步驟 4 選擇 [測試]並按下 ENTER ( b ) ,螢幕上會顯示網路連線狀態。 若透過有線連線連接至區域網路上的DHCP伺服 您也能在[設定]功能表的[連線狀態]進行測 器,會自動分配IP地址給本播放器。在完成實 試。 體連線後,有少數的家用網路可能需要調整播 放器的網路設定值。調整 [網路]設定值。 準備 在設定有線網路前,您需連接寬頻網路至家用 網路。 1. 在[設定]功能表選擇 [連線設定] 選項,並按 下 ENTER ( b )。 2. 使用 W/S/A/D 選擇[動態] 或 [靜態]IP模 式。 一般選擇[動態],以自動分配IP地址。 注意 若網路上無DHCP伺服器且您要手動設定IP 地址,選擇 [靜態] ,並使用 W/S/A/D 與數字鈕設定 [IP地址]、[子網路遮罩]、[閘 道]及[DNS伺服器]。若在輸入數字時發生錯 誤,按下 CLEAR 鈕,清除反白選取的部分 。 3. 選擇 [確定],再按下 ENTER ( b ) ,套用網 路設定。 4. 播放器會要求您測試網路連線。選擇 [確定] ,並按下 ENTER ( b ) ,完成網路連線。...
Page 94
連接 網路連線注意事項: y 重設路由器或數據機,可解決許多設定時發 生的網路連線問題。連接播放器至家用網路 後,快速關閉及(或)取下家用網路路由器 或纜線數據機的電源線。然後再次開啟電源 及(或) 連接電源線。 y 網路服務提供商(ISP)可能會根據服務條 款,限制能接收網路服務的裝置數量。請洽 詢您的 ISP,瞭解相關詳情。 y 本公司不對因您的寬頻網路連線或其他相連 設備發生通訊錯誤/故障,而造成播放器 及 (或)網際網路連線功能故障的情況負責。 y 本公司非BD-ROM光碟須透過網路連線才能 使用之功能的創作商及提供商,且不對其功 能性或持續可用性負責。部分光碟須使用網 路連線才能使用的相關素材,可能不相容於 本播放器。若您對於這些內容有所疑問,請 洽詢光碟製造商。 y 部分網路內容可能需要使用更高頻寬的連 線。 y 即便正確連接及設定播放器,也有可能因網 路擁塞、網路服務的品質或頻寬,或內容提 供商的問題,而無法正確操作部分網路內 容。 y 可能由於您的寬頻服務提供商(ISP)加以限 制,而無法操作部分網路連線功能。 y 您要負擔ISP收取的費用,包括但不限於連線 費用。 y 使用有線連線連接本播放器時,需使用10 Base-T或100 Base-TX 網路埠。若您的網路服 務無法使用此類連線,即無法連接播放器。...
Page 95
連接 注意 連接USB 裝置 y 本播放器在存取檔案時(音樂、相片、 電影),支援以 FAT16、FAT32 和 本播放器可播放USB 裝置的電影、音樂與照片 NTFS 格式化的 USB 隨身碟/外接硬碟 檔案。 。對 BD-Live 及 Audio CD 錄寫,只支 援 FAT16 及 FAT32 格式。用 FAT16 或 播放USB 裝置的內容 FAT32 格式的 USB 閃存驅動器/外接硬碟 進行 BD-Live 及音訊 CD 錄寫。 1. 將USB 裝置置入USB 埠,直到卡住為止。 y USB 裝置可作為本地儲存設備,搭配網 路使用 BD-Live 光碟。 VOLUME y 本機組最多可以支援擁有 8 個分割區的 USB 裝置。 PORTABLE IN y 操作時(播放等)勿取出 USB 裝置。 500 mA y 不支援連接至電腦時需要安裝額外程式 的USB 裝置。 y USB 裝置:支援 USB1.1與 USB2.0的USB 裝置。 2. 按下 HOME MENU ( n )。 y 可播放電影、音樂與照片檔案。請參見 3. 使用 A/D 選擇 [影片]、[相片]或[音樂],並...
Page 96
系統設定 設定 [顯示]功能表 電視機螢幕的長寬比 調整設定功能的設定值 根據您的電視機機型,選擇電視機的長寬比選 項。 您可在[設定]功能表中,變更播放器的設定 值。 [4:3信箱] 1. 按下 HOME MENU ( n )。 連接標準 4:3 電視機時選擇此選項。在影 像上下會有黑邊,呈現電影院般的效果。 [4:3全景掃描] 連接標準 4:3 電視機時選擇此選項。會裁 切畫面,以符合您的電視機螢幕。會切掉 畫面的兩側。 [16:9 原始模式] 2. 使用 A/D ,選擇[設定] ,並按下 ENTER 連接 16:9寬螢幕電視機時選擇此選項。以 ( b )。出現[設定]功能表。 原始4:3長寬比顯示4:3的畫面,左右兩 側會出現黑邊。 [16:9 全螢幕] 連接 16:9寬螢幕電視機時選擇此選項。水 平調整4:3畫面(以線性比例)塞滿整個 畫面。 注意 3. 使用 W/S ,選擇第一個設定選項,並按下 D 移動到第二層。...
Page 103
操作 一般播放 播放光碟 1. 按下 B (OPEN/CLOSE),將光碟放在光碟托 使用 [HOME] 功能表 盤上。 按 HOME MENU ( n ) 鍵後,主功能表即顯示 2. 按下 B (OPEN/CLOSE),關閉光碟托盤。 出來。按 W/S/A/D 鍵選擇類別,按 ENTER 本機會自動播放多數Audio CD、BD-ROM及 ( b ) 鍵。 DVD-ROM 光碟。 3. 按下 HOME MENU ( n )。 4. 使用 A/D 選擇 [影片] 或 [音樂],並 按下 ENTER ( b )。 5. 按 W/S 鍵選擇 [Blu-ray 碟片]、[DVD]、 [VR] 或[聲音] 選項, 按 ENTER ( b ) 鍵。 注意...
Page 104
操作 播放藍光 3D 光碟 欣賞BD-Live™ 本播放器能夠播放載有左眼和右眼獨立影像的 支援具備網絡擴展功能的 BD-Live(BD-ROM 藍光 3D 光碟。 版本 2 設定檔 2)的 BD-ROM 使您只要把播放 器連接到互聯網,便可享受如下載電影預告片 等更多功能。 準備 1. 檢查網路連線與設定(第 26-28 頁)。 要使用立體視覺 3D 模式播放藍光 3D 標 2. 將USB 儲存裝置置入前面板USB 埠。 題,您需要: 下載額外內容時,需使用USB 儲存裝置。 y y y 確 認電視機可觀看3D,且配有HDMI 3. 按下 HOME MENU ( n ),設定 [設定] 功能 (3D) 輸入。 表中的 [BD-LIVE 連接] 選項(第 34 頁)。 y 必 要時,請戴上3D眼鏡,體驗3D樂趣。 視您使用的光碟而定,若 [BD-LIVE 連接]選 y y y 請 檢查 BD-ROM 標題是否藍光 3D 光碟。 項設定為 [部分允許],可能無法使用 y y y 將 HDMI 纜線(類型 A,附乙太網路的 BD-Live 功能。...
Page 105
操作 播放網路伺服器上的檔案 輸入網路使用者 ID與密碼 視您的電腦環境,您可能需要輸入網路使用者 ID 及密碼,以存取共享資料夾。 本播放器可藉由家庭網路播放 PC 或 DLNA 伺 1. 若有需要輸入網路使用者 ID 與密碼,將會 服器上的影片、音樂、及相片檔案。 自動顯示鍵盤功能表。 1. 檢查網路連線與設定值(第 26-28 頁)。 2. 使用 W/S/A/D ,選擇虛擬鍵盤上字元, 2. 按下 HOME MENU ( n )。 再按下 ENTER ( b ) 確認輸入內容。 3. 使用 A/D 選擇 [影片]、[相片] 或 [音樂], 按 DISPLAY ( m ) 鍵,用顯示出來的延伸字 並 按下 ENTER ( b )。 符組輸入帶有特殊重音標示的子母。 4. 按 W/S 鍵選擇 DLNA 媒體伺服器或電腦 上的共享資料夾,按 ENTER ( b ) 鍵。 [取消] – 返回上一個畫面。...
Page 106
操作 對音訊及視訊內容的基本操作 對相片內容的基本操作 停止播放 播放投影片 播放中按 Z (STOP) 鍵。 按 d (PLAY) 鍵,開始投影片播放。 暫停播放 停止投影片播放 播放中,按 M (PAUSE/STEP) 鍵。 投影片播放中按 Z (STOP) 鈕。 按 d (PLAY) 鍵,繼續播放。 暫停投影片播放 逐格播放(視訊) 投影片播放中,按 M (PAUSE/STEP) 鍵。 播放電影按下 M (PAUSE/STEP)。 按 d (PLAY) 鍵,重新開始投影片播放。 重複按下 M (PAUSE/STEP)逐格播放。 跳到上一個/下一個相片 向前或向後掃描 全螢幕檢視相片時,按 A 或 D 鍵跳到上一個/ 播放時按下 c 或 v ,快轉或快速倒轉播...
Page 107
操作 繼續播放 eroyt, 視使用的光碟,本機會記錄您按下 Z (STOP) 的 位置。 若螢幕短暫出現「 MZ (繼續停止)」, 按下 d (PLAY) 繼續播放(從場景記憶點)。 若您按下 Z (STOP) 兩次或取出光碟,螢幕會 出現「 Z (完全停止)」的字樣。本機會清除 停止點。 注意 y 按下 1 (STANDBY/ON)、 B (OPEN/ CLOSE) 等按鈕時,會清除繼續播放點。 y 恢復播放功能未能應用於含有 BD-J 的 BD-ROM 光碟。 y 若您在播放BD-ROM 互動標題時按下 Z (STOP),本機即會進入完全停止模式 。...
Page 108
操作 進階播放 重複指定的段落 erot 本播放器可重複播放選定的段落。 重複播放 1. 播放中,按 REPEAT ( h ) 鍵選擇 [A-],從 erotu 您要重複播放的段落起點開始播放。 2. 在部分結束處按下 ENTER ( b )。將連續重 在播放時重複按下 REPEAT ( h ) 鈕,選擇要 複播放您選擇的部分。 使用的重複模式。 3. 重複按下 REPEAT ( h ) 鈕,選擇 [關閉], Blu-ray 光碟/DVD 返回正常播放模式。 j A- – 連續重複播放所選擇的段落。 注意 j 章節 – 重複播放目前的章節。 j 標題 – 重複播放目前的標題。 y 您不可選擇短於3 秒鐘的內容。 y 部分光碟或標題無法使用此功能。 重複按下 REPEAT ( h ) 鈕,選擇 [關閉],即 可返回至正常播放模式。...
Page 119
操作 使用線上 您可以透過線上功能使用網路上的各種內容服 務。 1. 檢查網路連線與設定值(第26-28頁)。 2. 按下 HOME MENU ( n )。 3. 按 A/D 鍵選擇 [高階] 選項,按 ENTER ( b ) 鍵。 4. 按 A/D 鍵選擇線上服務,按 ENTER ( b ) 鍵。 注意 y 各服務的詳細說明,請洽內容提供者或 瀏覽各該服務的支援鏈接。 y 線上服務的內容及服務相關的資訊 (包括 使用者介面) 可能有變。請參閱每種服務 各自的網站,瞭解最新資訊。 y 請注意,當您向線上服務提供使用者名 稱、密碼、或其他登入資訊或個人資訊 ,而 Pioneer 儲存這些資訊時,相關的私 隱政策將應用至您的私隱及法律權益。 請參閱 WEB 網站上的 Pioneer 私隱政策 。...
Page 120
操作 故障排除 一般 情況 原因 & 解決方法 無法開啟電源。 y 牢固將電源線插入插座。 y 放入可播放的光碟。(檢查光碟類型、色彩系統及區碼) 本機無法開始播放。 y 以播放面朝下的方式擺放光碟。 y 將光碟正確放入光碟托盤的導槽。 y 清潔光碟。 y 取消評等功能或變更評等水準。 無法變更角度。 y 所播放的DVD影片未錄製多角度的內容。 無法播放音樂/照片/電影 y 檔案末採用本機可播放的格式。 檔案。 y 本機不支援電影檔案的編碼器。 y 遙控器未對向本機的遙控器感應器。 遙控器不能使用。 y 遙控器距離本機太遠。 y 遙控器與本機之間有障礙物。 y 遙控器的電池沒電。 有插入插頭,但是無法開關 您可以按照以下步驟重設本機: 本機的電源。 1. 按 STANDBY/ON 鈕至少五秒鐘。會強迫本機關機,然後再重...
Page 121
故障排除 網路 情況 原因 & 解決方法 無法使用BD-Live功能。 y 相連的USB儲存設備內的空間不足。 連接至有至少 1GB 可用空間的USB儲存設備。 y 確認本機正確連接至區域網路,並且可存取網際網路(請參見 第26-28頁)。 y 您的寬頻網路速度太慢,無法使用BD-LIVE 功能。建議聯絡您 的網路服務提供商(ISP)並增加寬頻網路的速度。 y [設定]功能表的 [BD-LIVE 連接] 選項設定為[禁止]。設定選項為 [允許]。 YouTube™等串流影片服務 y 您的寬頻網路速度太慢,無法使用串流影片服務。 經常出現停止或播放時出現 建議聯絡您的網路服務提供商(ISP)並增加寬頻網路的速度。 「緩衝中」的情況。 在 PC 或媒體伺服器分享的 y 您的媒體伺服器使用防火牆或防毒軟體。 資料夾或檔案不會顯示於裝 關閉電腦或媒體伺服器上的防火牆或防毒軟體。 置清單。 y 播放器未連接至您的電腦或媒體伺服器所連接的區域網路。...
Page 122
沒有畫面。 機的畫面。 y 牢固連接視訊線。 y 檢查[設定]功能表的[HDMI 色彩設定] 是否正確設定為符合視訊 連線的設定值。 y 您的電視機可能不支援播放器上的解析度。變更解析度為電視 可接受的解析度。 y 播放器的HDMI輸出孔連接至不支援版權保護技術的DVI 裝置。 y 您正在播放與電視採用不同色彩系統的光碟。 畫面出現雜訊。 y 變更解析度為電視可接受的解析度。 y 用 HDMI 纜線(類型 A,附乙太網路的高速HDMI™ 排線)將播 播放藍光 3D 光碟的時候無 法輸出 3D 影像。 放器連接電視機。 y 您所用的電視機不支援「HDMI 3D 指定格式」。 y [設定] 選單的 [3D 模式] 選項設定成 [關閉]。將選項設定為 [打 開]。 聲音 情況 原因 & 解決方法 沒有聲音或聲音失真。 y 本機為掃描、慢速播放或暫停模式。 y 音量很小。 y 檢查喇叭線接線的情況(第15頁)。 更新 請注意,本產品的資訊於 Pioneer 網站上有所提供。請查看網站以取得有關更新的資訊或本播放器 的服務資訊。...
Page 129
附錄 規格 一般 電源需求 AC 110-240 V, 50/60 Hz 耗電 85 W (待機模式:低於 0.3 W) 尺寸(W x H x D) 約 430 x 64 x 304 公釐 淨重(概略值) 3.4 公斤 運作溫度 5 °C 到 35 °C 運作濕度 5 % 到 85 % 輸入/輸出 VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA 孔 x 1 (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA 孔 x 1 COMPONENT VIDEO OUT (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA 孔 x 2 HDMI IN/OUT(影片/聲音) 19 pin (類型 A,HDMI™ Connector) ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA 孔 (L, R) x 1 DIGITAL IN(OPTICAL) 3 V (p-p) , 光纖孔 x 1 PORTABLE IN 0.5 Vrms (3.5 mm 立體聲孔) 選台器 FM 調諧範圍 87.5 至 108.0 MHz 擴大機 功率輸出(RMS) 總功率 560 W 前置 180 W × 2(1 kHz,4 Ω,THD 10 %) 超低重音喇叭 200 W(100 Hz,3 Ω,THD 10 %) 系統...
Page 130
附錄 喇叭 HTZ-HW919BD S-BD919HW y 前置揚聲器 淨尺寸 類型 雙向 900 x 66 x 93 公釐 (W x H x D) 額定阻抗 4 Ω 淨重 1.6 公斤 S-BD808SW y 超低重音喇叭 淨尺寸 類型 單向1 130.5 x 420 x 375 公釐 (W x H x D) 額定阻抗 3 Ω 淨重 4.4 公斤 y 本公司保留變更設計及規格的權利,恕不事先通知。...
Page 134
附錄 you have. You must make sure that they, and give any other recipients of the In addition, mere aggregation of too, receive or can get the source code. Program a copy of this License along another work not based on the And you must show them these terms so with the Program.
Page 135
附錄 expressly provided under this License. protecting the integrity of the free OTHERWISE STATED IN WRITING THE Any attempt otherwise to copy, software distribution system, which COPYRIGHT HOLDERS AND/OR OTHER modify, sublicense or distribute the is implemented by public license PARTIES PROVIDE THE PROGRAM "AS Program is void, and will automatically practices.
Page 136
附錄 You should have received a copy of to take away your freedom to share and libraries, is covered by the ordinary GNU the GNU General Public License along change it. By contrast, the GNU General General Public License. This license, the with this program;...
Page 137
附錄 copyright holder or other authorized You must cause the files modified version 2, instead of to this License. (If party saying it may be distributed to carry prominent notices stating a newer version than version 2 of the under the terms of this Lesser General that you changed the files and ordinary GNU General Public License Public License (also called "this...
Page 138
附錄 use of the object file is unrestricted, Accompany the work with a parties who have received copies, or regardless of whether it is legally written offer, valid for at least rights, from you under this License a derivative work. (Executables three years, to give the same will not have their licenses terminated containing this object code plus...
Page 139
附錄 range of software distributed through WARRANTIES OF MERCHANTABILITY Software Foundation, Inc., 51 Franklin that system in reliance on consistent AND FITNESS FOR A PARTICULAR Street, Fifth Floor, Boston, MA 02110-1301 application of that system; it is up to PURPOSE. THE ENTIRE RISK AS TO THE the author/donor to decide if he or QUALITY AND PERFORMANCE OF Also add information on how to contact...
Page 140
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178- 4270 Printed in Indonesia...