Page 1 E-MANUAL...
Page 2: Table Of Contents
Contents Channel Setting Preference Features Using the INFO button (Now & Next guide) Executing initial setup Memorising channels Setting the Time Using the Channel menu Using the Sleep Timer Locking Programme Setting the On / Off Timer Other Features Economical Solutions Other Features Basic Features Changing the Preset Picture Mode...
Page 3 Playing the Photos / Videos / Music Other Features Viewing the e-Manual Using the Self Diagnosis Updating the Software Changing the Use Mode Viewing the Contact Samsung Using the Soccer Mode Using the Screen & Sound Capture function Using the Satellite System...
Page 4: Using The Info Button (Now & Next Guide)
❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. When you press the INFO button, a channel information banner will appear on the top of the screen.
Page 5: Memorising Channels
❑ Memorising channels Aerial ■ (depending on the country and model) MENUm → → → ENTERE Broadcasting Aerial Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV. ◀...
Page 6 Auto Tuning ■ (depending on the country and model) MENUm → → → ENTERE Broadcasting Auto Tuning Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears. ●...
Page 7 → When selecting Cable Digital & Analogue, Digital Analogue – Operator Selection (depending on the country and model): Selects a provider of cable services. – Search Mode: Scans for all channels with active broadcast stations and stores them in the TV. If you select Quick, you can set up the Network, Network Frequency,...
Page 8: Using The Channel Menu
❑ Using the Channel menu MENUm → → → ENTERE Broadcasting Channel List Channel List ■ Channel List contains the channels your TV displays when you press the channel button. You can view channel information, All, TV, Radio, Data/Other, Analogue Favourites 1-5.
Page 9 Channel Sorting ● Number / Name: Arranges the channel order according to channel number or name on the list. Channel Mode ● Aerial: Switches to or Cable. (depending on the country and model) ● Edit Favourites: Sets channels you watch frequently as favourites. For detailed information about using Edit Favourites, refer to...
Page 10 ● Favourites 1-5: Shows all favourite channels, arranged in up to five groups. Each group has a separate screen. The TV displays only if you have added favourites using Favourites 1-5 Edit Favourites. ● All: Shows all currently available channels. ●...
Page 11 Guide ■ (Depending on the country and model) MENUm → → → ENTERE Broadcasting Guide The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time.
Page 12 Schedule Manager ■ MENUm → → → ENTERE Broadcasting Schedule Manager You can set a desired channel to be displayed automatically at the intended time. In addition, you can view, modify or delete a channel you have reserved to watch. You must set the current time first using the →...
Page 13 ● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri Everyday to set at your convenience. If you select Manual, you can set the day you want. The (c) mark indicates the day you’ve selected. ● Date: You can set the desired date. It is available when you select in Repeat.
Page 14 Edit Channel ■ MENUm → → → ENTERE Broadcasting Edit Channel You can edit or delete channels. 1. Go to Edit Channel screen. 2. Press the ▲/▼ buttons to select the desired channel, then press the ENTERE button. The (c) mark indicates the channel you’ve selected. You can select more than one channel.
Page 15 Using the coloured and function buttons with the Edit Channel. ● (Change Number): Changes channel order on the channel list. – E (Done): Completes changing the channel order. Digital channel does not support this function when the Edit Channel is set to Disable. (depending on the country and model) Number ●...
Page 16 ● Blue (Select All Deselect All): Selects or deselects all channels at once. ● To): Goes to channel directly by pressing numbers (0~9). ● k (Page): Move to previous or next page. ● T (Tools): Displays the option menu. The option menu items that appear may differ depending on the channel status and type.
Page 17 – Category: Changes the channel mode to All, TV, Radio, Data/Other, Analogue, Recently Viewed, Most Viewed. The selected channel mode is displayed. – Edit Favourites: Goes to Edit Favourites screen directly. – (analogue channels only): Assigns a name of up to Rename channel five characters to a channel.
Page 18 Edit Favourites ■ MENUm → → → ENTERE Broadcasting Edit Favourites You can add, edit or delete favourite channels. 1. Go to Edit Favourites screen. 2. Press the ▲/▼ buttons to select the desired channel, and then press ENTERE button. 3.
Page 19 Using the coloured and function buttons with the Edit Favourites. ● (Category Change order) – Category: Changes the channel mode to All, TV, Analogue, Recently Viewed. The selected channel mode is displayed. Viewed, Most – Change order: Changes the favourite channel order. –...
Page 20 ● Green (Change Fav.): Changes favourite list among Favourites 1-5. ● Yellow (Select All Deselect All): Selects or deselects all channels at once. ● Blue (Add / Delete) – Add: Adds selected channels to Favourites 1-5. – Delete: Deletes the favourite channel from Favourites 1-5.
Page 21 ● To): Goes to channel directly by pressing numbers (0~9). ● k (Page): Moves to previous or next page. ● T (Tools): Displays the option menu. The option menu items that appear may differ depending on the channel status and type. –...
Page 22: Locking Programme
❑ Locking Programme Programme Rating Lock ■ (depending on the country and model) MENUm → → → ENTERE Broadcasting Programme Rating Lock Prevents unauthorised users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If the selected channel is locked, the “\”...
Page 23 Channel Lock ■ MENUm → → → ENTERE Broadcasting Channel Lock Locks channels in Channel menu to prevent unauthorised users, such as children, from watching unsuitable programme. Available only when the is set to TV. Source ◀ ▶ English...
Page 24: Other Features
❑ Other Features Channel Settings ■ MENUm → → → ENTERE Broadcasting Channel Settings ● (or Area) Country (Depending on the country and model) Selects your country (or area) so that the TV can correctly auto-tune the broadcasting channels. ◀ ▶...
Page 25 ● Manual Tuning Scans for a channel manually and stores in the TV. If a channel is locked, the PIN input window appears. According to the channel source, Manual Tuning may be supported. ● Digital Channel Tuning: Scans for a digital channel manually and stores in the TV.
Page 26 ● Analogue Channel Tuning: Scans for an analogue channel. Press the button to search the channels by adjusting the Programme, Colour System, Sound System, Channel, Search. Channel mode – (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to the position numbers from P0 to P99.
Page 27 ● Fine Tune (analogue channels only) If the signal is weak or distorted, fine tune the channel manually. Fine tuned channels are marked with an asterisk “*”. To reset the fine-tuning, select Reset. ◀ ▶ English...
Page 28 Subtitle ■ MENUm → → → ENTERE Broadcasting Subtitle Use this menu to set the Subtitle mode. ● Subtitle: Switches subtitles on or off. ● Subtitle Mode: Sets the subtitle mode. If the programme you are watching does not support the Hearing Impaired function,...
Page 29 Audio Options ■ (digital channels only) MENUm → → → ENTERE Broadcasting Audio Options ● Audio Language Changes the default value for audio languages. Primary Audio Secondary Audio: You can set the primary or secondary audio. The available language may differ depending on the broadcast. ◀...
Page 30 ● Audio Format When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV speaker function.
Page 31 Teletext Language ■ (depending on the country and model) MENUm → → → ENTERE Broadcasting Teletext Language ● Teletext Language English is the default in cases where the selected language is unavailable in the broadcast. ● Primary teletext Secondary teletext Primary teletext Secondary teletext may not be supported in...
Page 32 Digital Text ■ (depending on the country and model) MENUm → → → ENTERE Broadcasting Digital Text If the programme broadcasts with digital text, this feature is enabled. Only MHEG EPG will function in New Zealand. ◀ ▶ English...
Page 33: Changing The Preset Picture Mode
❑ Changing the Preset Picture Mode Picture Mode ■ MENUm → → → ENTERE Picture Picture Mode Select your preferred picture type. When connecting a PC, you can only make changes to the Entertain Standard. ● Dynamic: Suitable for a bright room. ◀...
Page 34: Adjusting Picture Settings
❑ Adjusting Picture Settings Backlight Contrast Brightness Sharpness Colour Tint (G/ ■ Your television has several setting options for picture quality control. NOTE ● In analogue TV, modes of the PAL system, the Tint (G/R) function is not available. ● When connecting a PC, you can only make changes to Backlight, ◀...
Page 35 Picture Size ■ MENUm → → → ENTERE Picture Picture Size Sets the various picture options such as picture size and aspect ratio. The available items may differ depending on the selected mode. Depending on the input source, the picture size options may vary. ●...
Page 36 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. by using ▲/▼ buttons. Adjusts the Position Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. by using ▲/▼ button. Adjusts the Zoom Position...
Page 37 Fit: Displays the full image without any cut-off when HDMI (720p / Screen 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. Smart View 1: Reduces a 16:9 picture by 50%. This mode is only available for LED TVs and in HDMI mode. Smart View 2: Reduces a 16:9 picture by 25%.
Page 38 NOTE ● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to centre the picture: 1. Select the Position. Press the ENTERE button. 2. Press the ▲/▼/◄/► button to move the picture. ●...
Page 39 ■ MENUm → → → ENTERE Picture You can watch the TV tuner and one external video source simultaneously. (Picture-in-Picture) does not function in the same mode. NOTE ● If you turn the TV off while watching in mode, the PIP window will disappear.
Page 40 ● settings Main picture Sub picture TV, AV Component, HDMI1, HDMI2/DVI (depending on the country and model) ● PIP: Activates or deactivates the function. ● Source (depending on the country and model): Selects the source for the sub-screen. ● Channel: Selects the channel for the sub-screen. ◀...
Page 41: Changing The Picture Options
❑ Changing the Picture Options Advanced Settings ■ MENUm → → → ENTERE Picture Advanced Settings (available in Standard Movie mode) You can adjust the detailed setting for the screen including colour and contrast. When connecting a PC, you can only make changes to the White Balance and Gamma.
Page 42 ● RGB Only Mode: Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ● Space: Adjust the range of colours available to create the image. Colour ● White Balance: Adjusts the colour temperature for a more natural picture. Point: Controls the white balance in 2 point interval by adjusting the red, green, and blue brightness.
Page 43 ● Gamma: Adjusts the primary colour intensity. ● Motion Lighting: Reduces power consumption by brightness control adapted motion. Only available in Standard mode. When changing a setting value of Backlight, Brightness or Contrast, will be set to Off. Motion Lighting ◀...
Page 44 Picture Options ■ MENUm → → → ENTERE Picture Picture Options When connecting a PC, you can only make changes to the Colour Tone. ● Colour Tone: Adjusts the colour tone. Warm1 Warm2 will be deactivated when the picture mode is Dynamic.
Page 45 ● Digital Clean View: If the broadcast signal received by your TV is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen. When the signal is weak, try other options until the best picture is displayed.
Page 46 ● HDMI Black Level: Selects the black level on the screen to adjust the screen depth. Available only in HDMI mode (RGB signals). ● Mode: Sets the TV to automatically sense and process film signals from Film all sources and adjust the picture for optimum quality. Available in TV mode and external input mode which supports SD (480i / 576i) and HD (1080i) except in when connected to a PC.
Page 47 ● Analogue Clean View (analogue channels only) (depending on the country and model): Reduces diagonal noise in picture caused by the crosstalk of signals. ● (depending on the country and model): Removes drag LED Clear Motion from fast scenes with a lot of movement to provide a clear picture. It will be deactivated when the Picture Mode is set to Natural.
Page 48 Picture Off ■ MENUm → → → ENTERE Picture Picture Off The screen is turned off but the sound remains on. Press any button except the power key or volume button to turn on the screen. ◀ ▶ English...
Page 49 Reset Picture ■ MENUm → → → ENTERE Picture Reset Picture Resets your current picture mode to its default settings. ◀ ▶ English...
Page 50: Changing The Preset Sound Mode
❑ Changing the Preset Sound Mode Sound Mode ■ MENUm → → → ENTERE Sound Sound Mode ● Standard: Selects the normal sound mode. ● Music: Emphasises music over voices. ● Movie: Provides the best sound for movies. ● Voice: Emphasises voices over other sounds. Clear ◀...
Page 51: Adjusting Sound Settings
❑ Adjusting Sound Settings Sound Effect ■ (standard sound mode only) MENUm → → → ENTERE Sound Sound Effect ● DTS TruSurround This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.
Page 52 ● Equaliser Equaliser to customise sound setting for each speaker. Balance: Adjusts the balance between the right and left speaker. 100Hz 300Hz 1kHz 3kHz 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equaliser to its default settings. Speaker Select is set to External...
Page 53 Speaker Settings ■ MENUm → → → ENTERE Sound Speaker Settings ● Speaker Select A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
Page 54 ● Auto Volume To equalise the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to mode, making almost no noise. It is useful at night. Normal To use the volume control on the source device connected to the TV, Auto Volume on the TV.
Page 55 Additional Settings ■ MENUm → → → ENTERE Sound Additional Settings ● DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. According to the type of broadcast signal, can be MPEG...
Page 56 ● Digital Audio Out: Digital Audio Out is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Format: You can select the digital audio output format. The available Audio digital audio output format may differ depending on the input source. By connecting to 5.1ch speakers in a dolby digital setup, maximise your interactive 3D sound experience.
Page 57 ● Dolby Digital Comp: This function minimises signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). Select Line to obtain dynamic sound, and to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
Page 58 Reset Sound ■ MENUm → → → ENTERE Sound Reset Sound Resets all sound settings to the factory defaults. ◀ ▶ English...
Page 59: Selecting The Sound Mode
❑ Selecting the Sound Mode t When you set to I-II, the current sound mode is displayed on the screen. Dual Audio Type Dual I-II Default A2 Stereo Mono Mono Automatic change ↔ Stereo Stereo Mono ↔ Dual Dual I Dual II Dual I NICAM Stereo...
Page 60: Executing Initial Setup
❑ Executing initial setup Setup ■ MENUm → → → ENTERE System Setup Configures the channels and the time when setting up the TV for the first time or when resetting the unit. Execute the initial setup following instructions that the TV guides. ◀...
Page 61: Setting The Time
❑ Setting the Time Time ■ MENUm → → → ENTERE System Time The current time will appear every time you press the INFO button. ● Clock: Setting the clock is for using various timer features of the TV. If you disconnect the power cord, you have to set the clock again. Clock Mode: Sets up the current time manually or automatically.
Page 62 – Manual: Sets the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Sets the Date and Time. Available only when Clock Mode is set to Manual.
Page 63: Using The Sleep Timer
❑ Using the Sleep Timer MENUm → → → → ENTERE System Time Sleep Timer ● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes) Use the ▲/▼ buttons to select a period of time, and then press ENTERE.
Page 64: Setting The On / Off Timer
❑ Setting the On / Off Timer MENUm → → → → ENTERE System Time On Timer <or> Off Timer ● Timer: You can set up three separate On Timer configurations. (On Timer On Timer On Timer Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun to set at your convenience.
Page 65 Source: To select the source of the content that will play when the TV turns on, you can: – Select and have the TV display a specific air channel. – Select and have the TV play back photo or audio files from a USB device.
Page 66 If you select a source other than or USB, you must: ● Have a cable or satellite set-top box attached to that source. ● Set the set-top box to the channel you want to watch when the TV goes on, and leave the set-top box turned on. When you select a source other than or USB, the aerial and channel options will disappear.
Page 67 (when the is set to USB): Select a folder in the USB Music Photo Source device containing music or photo files to be played when the TV is turned on automatically. – If there is no music file on the USB device or the folder containing a music file is not selected, the timer function does not operate correctly.
Page 68 – It is recommended that you use a USB memory stick and a multi card reader when using Timer. – function may not work with USB devices with a built-in On Timer battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognised.
Page 69: Economical Solutions
❑ Economical Solutions Eco Solution ■ MENUm → → → ENTERE System Eco Solution ● Saving: This adjusts the brightness of the TV in order to reduce Energy power consumption. ● Eco Sensor (depending on the country and model): To enhance your power savings, the picture settings will automatically adapt to the light in the room.
Page 70 ● No Signal Power Off: To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. Disabled when the PC is in power saving mode. ● Off: The TV will be automatically turned off when no user Auto Power operation is received for 4 hours.
Page 71: Other Features
❑ Other Features Menu Language ■ MENUm → → → ENTERE System Menu Language Sets the menu language. Auto Protection Time ■ MENUm → → → ENTERE System Auto Protection Time ◀ ▶ If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Page 72 General ■ MENUm → → → ENTERE System General ● Game Mode: When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NOTE ● Precautions and limitations for game mode –...
Page 73 – is set to is set to Picture Mode Standard Sound Mode Movie. ● Lock: Locks or unlocks all the keys on the panel. Panel ● Logo: Displays Samsung logo when the TV is turned on. Boot ◀ ▶ English...
Page 74 Change PIN ■ MENUm → → → ENTERE System Change PIN Changes your password required to set up the TV. The PIN input screen appears before the setup screen. Enter your 4-digit PIN. Change the PIN using the Change PIN option.
Page 75 DivX® Video On Demand ■ MENUm → → → ENTERE System DivX® Video On Demand Shows the registration code authorised for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file.
Page 76: Using The Source List
❑ Using the Source List Source List ■ MENUm → → → ENTERE Applications Source List When you press the SOURCE button, screen will be displayed at Source once. You can only choose external devices that are connected to the TV. In Source, connected inputs are highlighted.
Page 77: Connecting A Usb Device
❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and movie files to the USB port on the side of the TV. 3. When USB is connected to the TV, popup window appears. You can select the Photos, Videos Music...
Page 78 It might not work properly with unlicenced multimedia files. Need-to-know list before using media contents ● MTP (Media Transfer Protocol) is not supported. ● Supported file systems are FAT, exFAT and NTFS. ● Certain types of USB digital camera and audio devices may not be compatible with this TV.
Page 79 ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ● Do not disconnect the USB device while it is loading.
Page 80 ● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
Page 81 ● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ● If a USB extension cable is used, the USB device may not be recognised or the files on the device may not be read. ●...
Page 82 Disconnecting a USB Device 1. Press the SOURCE button. 2. Select a desired USB device, and then press the TOOLS button. The Tools menu appears. 3. Select Device, and then wait until the selected USB device Disconnect USB is disconnected. You can remove a USB device from the TV. To remove a USB device from the TV, we recommend to use Disconnect USB Device...
Page 83: Using The Media Contents
❑ Using the Media Contents MENUm → → → ENTERE Applications Media Play Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. 1. Press the MEDIA.P or CONTENT button. (depending on the country and model) 2.
Page 84 Playing the selected files 1. Press the ▲ button to select Options at the top of each main screen and select Play Selected. 2. Select the desired files. The check box appears to the left of the selected files. Press ENTERE button again to deselect the file. 3.
Page 85 Copying the files to the other USB device (depending on the country and model) 1. Press the ▲ button to select at the top of the each main screen and Options select Copy. 2. Select the desired files. The check box appears to the left of the files. Press ENTERE button again to deselect the file.
Page 86: Playing The Photos / Videos / Music
❑ Playing the Photos / Videos / Music During playing a file, press the ▲/▼/◄/► button to select the desired menu. When the option menu is not displayed, press the TOOLS button or ENTERE button. You can also use ∂/∑/∫/π/µ buttons on the remote control during playback.
Page 87 Playback menu Button Operation Photos Videos Music ● Previous Next ● Start Slide Show Stop Slide Show ● ● Play Pause Mini Player* ● ● Previous Next Mini Player* ● ● ● Rewind Fast Forward ◀ ▶ *When setting the Background Music Mini Player in Photos, these buttons appear.
Page 88 Setting menu ● Photos Button Operation Slide Show Settings You can set the Speed Effects during the slide show. Zoom You can zoom into images in full screen mode. Rotate You can rotate images in full screen mode. Background Music / You can set background music when watching a slide show.
Page 89 During the slide show, all files in the file list will be displayed in order. When you press the ∂ (Play) button(or ▲ button → → Options Slide Show) in the file list, slide show will be started immediately. During the slide show, you can adjust the slide show speed using π (REW) or µ...
Page 90 ● Videos Button Operation Search Search Titles: You can move the other file directly. Bar: You can search the video using ◄ and ► button Search Time at one minute interval or entering the number directly. N It may not be supported depending on the input source. Repeat Mode You can play movie files repeatedly.
Page 91 If video time information is unknown, play time and progress bar are not displayed. In this mode, you can enjoy movie clips contained on a Game, but you cannot play the game itself. ● Supported Subtitle / Video Formats For the details, refer to “Specifications” in user manual. ◀...
Page 92 ● Music Button Operation Repeat You can play music files repeatedly. Shuffle You can play the music randomly. Sound Mode You can adjust the sound setting. Only displays the files with supported music file extension. Other file extensions are not displayed, even if they are saved on the same USB device. If the sound is abnormal when playing music files, adjust the Equaliser in the...
Page 93 Setting the Encoding language Sets the encoding language if the text is not supported. 1. Press the ▲ button to select at the top of music main screen and Options select Encoding. 2. Select the desired encoding language. ◀ ▶ English...
Page 94 ● Components & DTV Source Resolution Frequency (Hz) Components 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i...
Page 95: Viewing The E-Manual
❑ Viewing the e-Manual e-Manual ■ MENUm → → → ENTERE Support e-Manual You can read the introduction and instructions about the TV features stored in your TV. For the detailed information about e-Manual screen, refer to “How to use the e-Manual”...
Page 96: Using The Self Diagnosis
❑ Using the Self Diagnosis Self Diagnosis ■ MENUm → → → ENTERE Support Self Diagnosis Self Diagnosis might take few seconds, this is part of the normal operation of the ● Picture Test: Use to check for picture problems. ●...
Page 97 ● Signal Information (digital channels only): The HDTV channel reception quality is either imperfect or the channel are unavailable. Adjust your aerial to increase signal strength. ● Reset: Resets all settings to the factory defaults except network settings. The PIN input screen appears before the setup screen. Enter your 4-digit PIN.
Page 98: Updating The Software
– By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade.
Page 99 – By Channel: Upgrades the software using the broadcasting signal. If the function is selected during the software transmission period, software will be automatically searched and downloaded. The time required to download the software is determined by the signal status. ●...
Page 100: Changing The Use Mode
❑ Changing the Use Mode Use Mode ■ MENUm → → → ENTERE Support Use Mode Select the Use Mode suitable for your place. We strongly recommend you select Home Use. ● is the default setting. Home Use: Home Use ●...
Page 101: Viewing The Contact Samsung
❑ Viewing the Contact Samsung Contact Samsung ■ MENUm → → → ENTERE Support Contact Samsung Views this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.
Page 102: Using The Soccer Mode
❑ Using the Soccer Mode Soccer Mode ■ MENUm → → → ENTERE Applications Soccer Mode This mode provides optimised condition for watching sports games. ● (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to resume. When the is On, the picture and sound modes are set to Soccer Mode...
Page 103: Using The Screen & Sound Capture Function
The user may not use those features to capture pictures or audios without prior approval from the copyright owners or to use it unlawfully. Samsung does not accept responsibility for any misuse of the service. English...
Page 104 ● Screen & Sound Capture Turns the Screen & Sound Capture function on or off. ● Default Recording Device You can set the default device for saving captured image files and recorded audio files. This function is only available when the USB device is connected to the TV. If the Screen &...
Page 105 Recording Audio 1. Press }. This records audio in real-time. A popup window will appear on the screen while recording is in progress. The popup window displays the duration of the recording. 2. To stop recording, press }. The recording is stored as a .wav file on the USB device connected to the TV.
Page 106 Restrictions A USB device must be connected to the TV in order to use it. can only be used if there is more than 5MB free space Screen & Sound Capture available on the USB device connected to the TV. Do not turn off the TV or disconnect the USB device while using Screen &...
Page 107 Images captured while watching the TV in 3D are stored as 2D images. Screen & Sound Capture cannot be used under the following circumstances: – While Media Play is running – While using – No signal – Data service channels –...
Page 108: Using The Satellite System
❑ Using the Satellite System (depending on the country and model) For the details, you can find an additional web manual on our website "www. samsung.com". ◀ English...

Samsung ua58h5200 E-Manual

Quick Links

Related Manuals for Samsung ua58h5200

Summary of Contents for Samsung ua58h5200

Table of Contents