Program Launcher-Connect-Usb - Panasonic KX-TDA50 Pc Programming Manual

2.2.4 Program launcher—Connect—USB
This option allows direct entry of connection parameters, for cases where the PC is used to connect to one or
just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to multiple PBXs and
would prefer to choose from among pre-saved profiles instead, see 2.2.7 Program launcher—Connect—
Profile Setup for more details about creating profiles.
To connect to the PBX by RS-232C
1.
From the program launcher, select Connect.
The Login window will be displayed.
2.
Select a connection option.
•
Select a Profile Name if you want to use a pre-saved profile. This option is only available when one
or more profiles have been previously stored.
a.
Select the profile to use from the drop-down list.
b.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
•
To enter the parameters manually, select the PBX Model and confirm that the RS-232C radio button
is selected.
a.
Specify the settings as required. For more details, see the table below.
b.
Enter the system password for the PBX.
3.
Click Connect.
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
2.2.4 Program launcher—Connect—USB
Connects to the PBX in Interactive mode through the USB port on the PBX, or a USB port (USB Module)
attached to a DPT.
To connect to the PBX by USB
1.
From the program launcher, select Connect.
The Login window will be displayed.
2.
Select a connection option.
•
Select a Profile Name if you want to use a pre-saved profile.
a.
Select the profile to use from the drop-down list.
b.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
•
To enter the parameters manually, select the PBX Model and confirm that the USB radio button is
selected.
a.
Enter the system password for the PBX.
3.
Click Connect.
28 PC Programming Manual
Values
COMx
2400, 4800, 9600, 19200,
38400, 57600, 115200
Explanation
Specify the number of the COM port
assigned to the PC's RS-232C
interface. Only available COM ports are
displayed.
Specify the speed of data transmission.
Document Version 2010-11