Machine Settings; Technical Specifications - AEG LAVATHERM 59870 User Manual

Table of Contents

Advertisement

Available languages

Available languages

MACHINE SETTINGS

Setting
Buzzer per-
manent on/
off
Water hard-
1)
ness
Emptying
water reser-
voir
-
warning
2)
off
1) Water contains, a appliance quantity of limestone and mineral salts of which quantities vary according to
geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the
water compared to those prefixed by the factory could slightly influence the residual humidity of the
laundry at the end of the cycle. Your dryer allows you to tumble dryer the sensitivity of the drying sensor
based on conductivity values of the water.
2) By default the warning LED is always on at the end of the drying cycle or during the cycle if the water
reservoir is full. When using an external drain for the condensed water warning can be offi

TECHNICAL SPECIFICATIONS

Height x width x depth
Drum volume
Depth with loading door open
Height can be adjusted by
Weight when empty
Loading volume (depends on programme)
Voltage
1. Turn the programme dial to any programme.
2. Push at the same time the DRYNESS (DROGTEGRAAD) and SPIN SPEED (T/
MIN) buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off. You can use the buzzer option to acti-
vate or deactivate sound but the machine does not memorise your selection.
1. Turn the programme dial to any programme.
2. Push at the same time the DRYNESS (DROGTEGRAAD) and TIME (TIJD) but-
tons and hold down for approx. 5 seconds. The current setting is on the display:
low conductivity <300 μS/cm
medium conductivity 300-600 μS/cm
high Push >600 μS/cm
3. Push the START PAUSE (START PAUZE) button again and again until you set
necessary level.
4. To memorise setting push at the same time the DRYNESS (DROGTEGRAAD)
and TIME (TIJD) buttons or turn knob to OFF (UIT) position
1. Turn the programme dial to any programme.
2. Push at the same time the SPIN SPEED (T/MIN) and TIME (TIJD) buttons and
hold down for approx. 5 seconds.
The current setting is on the display:
– warning
icon and
– warning
icon and
Implementation
- warning message is off
- warning message is on
85 x 60 x 58 cm
108 l
109 cm
1.5 cm
approx. 52 kg
1)
max. 7 kg
230 V
Machine settings
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents