Description Of The Appliance; Operating The Appliance - Zanussi ZXL636IT User Manual

Description of the appliance

Cooking surface layout
1
145
6 mm
5
Control knobs
Symbol

Operating the appliance

Ignition of the burner
Warning! Be very careful when you use open fire in
kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1. Turn the control knob counterclockwise to the max-
imum position (
2. Keep the control knob pushed for approximately 5
seconds; this will let thermocouple to warm up. If not,
the gas supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not light, check
if the crown and its cap are in correct positions.
2
3
4
Description
no gas supply / off posi-
tion
ignition position / maxi-
mum gas supply
minimum gas supply
) and push it down.
1 Hob top
2 Semi-rapid burner
3 Control knobs
4 Auxiliary burner
5 Rapid burner
6 Electric cooking zone 1500 W
Electric cooking zones control knobs
Symbol
0
1
6
1 Burner cap
2 Burner crown
3 Ignition candle
4 Thermocouple
Function
off position
minimum heat
maximum heat
1
2
3
4
19