Trunk Lid Components (Sedan Model) - Suzuki SX4 Service Manual

9J-8 Hood / Fenders / Doors:
• Adjust door latch striker position by referring to "Rear
End Door Lock Assembly Removal and Installation
(Hatchback Model) in Section 9F".
• Adjust door cushion so that door contacts body when
closed.
• Apply sealant to contact face "A" of door hinge (1) and
apply grease to rotating part "B" of hinge (1).
Specified sealant and grease.
"A": Sealant 99000–31110 (SUZUKI Bond
No.1215)
"B": Grease 99000–25011 (SUZUKI Super Grease
A)

Trunk Lid Components (Sedan Model)

7
1
[A]: Trunk lid trim installation position
1. Trunk lid panel
2. Torsion bar holder
3. Weather-strip
5
6
E
2
4. Hinge
5. Torsion bar (left side)
: Apply grease 99000-25050 to rotating part.
6. Torsion bar (right side)
: Apply grease 99000-25050 to rotating part.
7. Yellow mark
E
4
8
3
[A]
A
A
A
A
A
A
A A
8. Blue mark
9. Trunk lid trim (if equipped)
I2RH019A1012-01
S7RW0A9A06011
A
A
A
9
I7RW0A9A0002-02