Download Print this page

GE GTW485 series Owner's Manual And Installation Instructions page 12

Hide thumbs Also See for GTW485 series:

Advertisement

Available languages

Available languages

About washer features.
Automatic
Load Sensing (on some models)
This determines the correct agitate profile, agitate duration and amount of water suited to the size and type of load placed in the washer.
The washer will not start the wash cycle or fill with water if the lid is open. When the lid is closed the machine is able to begin filling with
water in order to sense the load size.
NOTE:Automatic
Load Sensing initiates a spin at the beginning of the cycle and will take as much as 3 minutes to complete (significantly
shorter for smaller loads); this is normal operation.
NOTE: This is a high efficiency washing machine with agitator wash action. This system requires/ess water while providing effective cleaning
action. Youmay notice that the water level is lower than on your previous washer. This is normal for an agitator-equipped washer.
Liquid Fabric Softener Dispenser (on some models)
The agitator cap fits into the top of the agitator. If it accidentally comes
off, simply put it back on.
The fabric softener dispenser automatically releases liquid fabric
softener at the proper time during the cycle.
Do not stop the washer or raise the lid during the first spin. This will
cause the dispenser to empty too soon.
To use,follow these steps:
D
Make sure dispenser
securely
agitator.
is
attached to
r21 use only liquid
Pour into dispenser, using
diluted fabric softener.
amount recommended on package.
Never pour fabric softener directly on clothes. It may stain them.
F_l Add water to dispenser until it reaches the maximum fill line.
Do not pour anything into the agitator
if the (]gitator cop or dispenser is
removed.
ONLYthis
portion of the
dispenser is
visible once
installed into
agitator
F_ Select Deep Rinse option.
Options
2rid
Rinse
Soak
2nd
Rinse
I- Extra Spin
Deep Rinse
Note: Fabric softener may not dispense properly if the Deep Rinse
option is not selected.
Liquid Bleach
Liquid chlorine bleach should be added through the bleach
dispenser in the front left corner. Follow bleach manufacturer's
recommendations for the correct amount of liquid chlorine bleach
based on load size, taking care to not apply or spill it directly on
clothing.
NOTE: Do not use liquid chlorine bleach and laundry pretreatments
such as an Oxi product in the same wash load.
0 0-
Pretreatment
Place laundry pretreatments, such as an Oxi product, directly in the
bottom of the wash basket before loading clothes.
NOTE: Do not use liquid chlorine bleach and laundry pretreatments
such as an Oxi product in the same wash load.
12

Advertisement

loading

This manual is also suitable for:

Gtw460