Eco Saving Plus; Off Timer; Pc/Av Mode; Source Detection - Samsung C22F390FH series User Manual

Eco Saving Plus

The Eco Saving Plus function reduces power consumption by controlling the electric current used by the
monitor panel.
― This option is not available when
Bright
― This menu is not available when
Game Mode
― This menu is not available when
Eye Saver Mode
• Off: Deactivate the Eco Saving Plus function.
• Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
• Low: The power consumption will be reduced by 25% over the default setting.
• High: The power consumption will be reduced by 50% over the default setting.

Off Timer

Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to MENU System and set Off Timer
is in Dynamic Contrast mode.
is enabled.
is enabled.
is set to On.
Off Timer is set to automatically activate 4 hours after the
to Off.

PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
― This function does not support
Analog mode.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in
HDMI/DisplayPort mode and the screen says
activates, press the JOG button to display the function-button screen and then select the
select PC or AV.

Source Detection

Select either Auto or Manual as the method to recognize input signal.

Key Repeat Time

Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If
when a button is pressed.
Check Signal Cable or power saving mode
No Repeat is selected, a command responds only once
icon. You can
34