Timer - Husqvarna 105 Operator's Manual

6.3 Timer

The lawn should not be cut too often to obtain the best
mowing result. Consequently, it is important to limit the
operating time using the timer function if the working
area is less than the robotic lawnmower's working
capacity. When the robotic lawnmower is allowed to
mow too much, the lawn may appear flattened.
Besides, the robotic lawnmower is subjected to
unnecessary wear.
The timer function is also an ideal tool to control which
periods the robotic lawnmower should not mow, for
example, when the children are playing in the garden.
The factory setting for the timer is 07:00-23:00 and it
allows mowing every day of the week. This is normally
a suitable setting for a working area of about 600 m
When setting the timer, calculate that the robotic
lawnmower mows about 43 m
The table below provides suggestions for different
timer settings depending on garden size. The table can
be used to set the operating time. The times should be
seen as indicative, they may need to be adjusted to
suit the garden. Use the table as follows:
1.Find a work area that closest matches the garden's
area.
2.Select an appropriate amount of work days per week
(for some work areas 7 days may be needed).
3.Work hours per day shows how many hours a day
the robotic lawnmower will be allowed to work for the
selected amount of work days.
4.Suggested time interval shows a time interval that
corresponds to the required work hours per day.
Work area Work days per week
2
100 m
2
200 m
2
300 m
2
400 m
2
500 m
2
600 m
46 - English
6. MENU FUNCTIONS
2
per hour and day.
2
Work hours per day
5
7
5
7
5
7
5
7
6
7
7
.
Suggested time time interval
3,5h
2,5h
7h
5h
10h
7h
13h
9,5h
13,5
12h
14h
07:00 - 10:30
07:00 - 09:30
07:00 - 14:00
07:00 - 12:00
07:00 - 17:00
07:00 - 14:00
07:00 - 20:00
07:00 - 16:30
07:00 - 20:30
07:00 - 19:00
07:00 - 21:00