AEG FAVORIT 88060 VI User Manual page 37

Hide thumbs Also See for FAVORIT 88060 VI:
Table of Contents

Advertisement

Available languages

Available languages

USING THE DETERGENT
A
B
30
20
SETTING AND STARTING A
SETTING AND STARTING A
SETTING AND STARTING A
PROGRAMME
PROGRAMME
PROGRAMME
Setting mode
Setting mode
Setting mode
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• The display shows two horizontal sta-
tus bars.
If the control panel shows other condi-
tions, press RESET until the appliance is
in setting mode.
Starting a programme without
delay start
1. Open the water tap.
1. Press the release button (B) to
+
-
2. Put the detergent in the compart-
3. If the programme has a prewash
C
4. If you use detergent tablets, put
5. Close the lid. Make sure that the
2. Press the on/off button to activate
3. Set the programme.
4. If you want, you can set the options.
5. Close the appliance door. The pro-
Starting a programme with
delay start
1. Set the programme.
CAUTION!
Use only detergents for dish-
washers.
open the lid (C).
ment (A) .
phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.
If you use detergent tablets, put
If you use detergent tablets, put
the tablet in the compartment (
the tablet in the compartment (
the tablet in the compartment (A).
Close the lid. Make sure that the
Close the lid. Make sure that the
release button locks into position.
release button locks into position.
release button locks into position.
Do not use more than the cor-
Do not use more than the cor-
Do not use more than the cor-
rect quantity of detergent. Refer
rect quantity of detergent. Refer
rect quantity of detergent. Refer
to the instructions on the deter-
to the instructions on the deter-
to the instructions on the deter-
gent packaging.
Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.
the appliance. Make sure that the
appliance is in setting mode.
• The related programme number
flashes in the display.
gramme starts.
• The display goes off. If you open
the door while the appliance op-
erates, the display shows the pro-
gramme duration that decreases
with steps of 1 minute.
ENGLISH
37

Advertisement

Table of Contents
loading

Table of Contents