Specifications - Makita HM1801 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for heavy chiselling and demolition
work as well as for driving and compacting with
appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.31 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
Model
Overall length
Net weight
Safety class
equipment and
HM1801
1,100
824 mm
29.7 kg
END201-5
characteristics.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model HM1801
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.30 dB(A)
Model HM1810
Sound pressure level (L
its
Sound power level (L
Uncertainty (K) : 2.52 dB(A)
Vibration
The vibration total value (tri-axial vector sum) determined
ENE046-1
according to EN60745:
Model HM1801
Work mode : chiseling
ENF002-2
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HM1810
Work mode : chiseling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENF100-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
2
HM1810
1,100
824 mm
32.3 kg
/II
) : 84 dB(A)
pA
) : 104 dB(A)
WA
) : 84 dB(A)
pA
) : 104 dB(A)
WA
Wear ear protection
) : 14.0 m/s
h,CHeq
2
) : 9.0 m/s
h,CHeq
2
ENG905-1
ENG900-1
2
2
ENG901-1