Shoot A Still Image While Recording A Video Clip - Sanyo VPC-HD1AEX Instruction Manual

SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP

You can capture a still image (a single-shot) while recording a video clip.
1
Press the ON/OFF button for at
least 1 second to turn the camera
on.
2
Set the main switch to REC.
3
Press the video clip recording
button [
4
When you see a scene you'd like
to capture as a still image, press
the still image shooting button
[ ].
5
End the recording.
h Press the video clip recording
button to stop recording.
CAUTION
i When shooting a still image while recording a video clip, the flash does not operate.
i When shooting a still image while recording a video clip, the display briefly pauses,
and then returns to the video clip display after the still image is captured.
i If the still image resolution is set to v, it automatically changes to r and the
image is captured.
i When the remaining video recording time becomes approximately 50 seconds, it
will no longer be possible to capture a still image while recording a video clip. The
exact remaining recording time at which this occurs will differ depending on the
subject and on the video clip mode setting (page 71). If you intend to capture a still
image while recording a video clip, it is suggested that you take note of the
remaining video recording time.
Downloaded From VideoCamera-Manual.com Manuals
51
English
].
Video clip recording
Still image shooting button
Main switch
button [ ]
[ ]
00:00:09 00:00:09 00:00:09