Log; Call Time; Data Counter - Nokia N75 User Manual

R1114_en.book Page 75 Thursday, October 19, 2006 3:43 PM
Conference, Transfer, and Open active
the following:
Replace—to end an active call and replace it by answering
the waiting call
Send MMS (in UMTS networks only)—to send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press to send the file to a
compatible device (network service).
Send touch tones—to send touch tone strings, for
example, a password. Enter the touch tone string or search
for it in Address Book. To enter a wait character (w) or a
pause character (p), press repeatedly. Select
send the tone.
Tip! You can add touch tones to the
or Touch tones fields in a contact card.

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select Log. The device
registers missed and received calls only if the network
supports these functions, the device is switched on, and
within the network service area.
idle. Select from To clear all recent call lists, select
recent calls in the recent calls main view. To clear one of
the call logs, open the register you want to erase, and
select Options > Clear
open a register, scroll to the event, and press

Call time

To monitor the approximate duration of your incoming
and outgoing calls, press
To set the display of the call timers while a call is active,
select Log > Options
or No.
OK to
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Phone number
To clear call duration timers, select
timers. For this you need the lock code. See "Phone and
SmartChip," p. 104.

Data counter

To check the amount of data sent and received during
packet data connections, press
counter. For example, you may be charged for your packet
data connections by the amount of data sent and received.
Options > Delete
list. To clear an individual event,
.
, and select Log> Call time.
> Settings > Show call time > Yes
Options > Clear
, and select Log > Data
75