Back Panel - NEC NLT-40HDEM2 Owner's Manual

- You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your
manufacturers instruction books for specific information. Make sure all connections are made with both your set and
additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat dif-
ferent from your set.
1
1
Connect to Aerial socket
Connect the RF out socket of the VCR to the aerial
socket on the back of the set.
Connect the aerial cable to the RF aerial in socket
of the VCR.
Store the VCR channel on a desired programme
number using the 'Manual programme tuning' sec-
tion.
Select the programme number where the VCR
channel is stored.
Press the PLAY button on the VCR.
8
Watching VCR
< Back panel of the set >
Air
AC IN
VCR
- If you connect an S-VIDEO VCR to the S-VIDEO input, the pic-
ture quality is improved; compared to connecting a regular VCR
to the Video input.
- To avoid picture noise (interference), leave an adequate dis-
tance between the VCR and set.
Use the INPUT button on the remote control to select
AV3
Insert a video tape into the VCR and press the PLAY button on the
VCR. (See VCR owner's manual).
2
2
< Side panel of the set >
< Back panel of the set >
S-VIDEO IN
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
< Back panel of VCR >
or .
S-Video
R AUDIO L VIDEO
AV1 , AV2 ,