Start-Up Tone; Tone Settings - Nokia 8910 User Manual

Start-up tone

To set the phone to play or not to play a start-up tone when the phone is switched on, press Menu,
select Settings, Phone settings
If you have set a welcome note, the start-up tone will not be played, see Welcome note on page 50.

Tone settings

Press Menu, select Settings
menu, see Profiles (Menu 3) on page 45.
Select Incoming call alert
are Ringing, Ascending,
text message when Incoming call alert
is displayed.
Select Ringing tone, Ringing volume
message. The vibrating alert does not work when the phone is connected to a charger, desktop stand,
or a car kit.
Tip: If you receive a ringing tone via IR or OTA, you can save ten ringing tones at a time in the
ringing tone list.
Select Message alert tone
tones to set the phone to sound tones, for example, when the battery is running out of power.
Select Alert for to set the phone to ring only for calls from phone numbers that belong to a selected
caller group. Scroll to the caller group you want or
and Start-up tone.
and then Tone settings. You can find the same settings in the
to choose how the phone notifies you of an incoming voice call. The options
Ring once, Beep once
is set to
and Vibrating alert
to set the alert tone for the incoming messages,
©2002 Nokia Corporation. All rights reserved.
and Off. The phone does not ring at an incoming call or a
Off and Message alert tone
for an incoming voice call and an incoming
All calls and press Mark.
Profiles
is set to Off. The indicator
Keypad tones, or Warning
51