INITIAL SETTINGS
INITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 54)
1
Perform the initial settings.
• Press [
] repeatedly to display more items.
*
<Demonstration>
Activate or deactivate the
(Page 55)
display demonstration.
<Language>
Select the text language
(Page 56)
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Angle>*
Adjust the panel angle.
(Page 9)
<iPod Setup>
Select the connection
(Page 23)
method of iPod/iPhone.
<Front Camera>
Configure the settings to
(Page 32)
display the picture from
the connected front view
camera.
4
<Rear Camera>
Configure the settings to
(Page 32)
display the picture from
the connected rear view
camera.
<User
Change the display design.
Customize>
(Page 50)
2
Finish the procedure.
• Press [
] repeatedly to change the page on
the <Initial Setup> screen.
The Home screen is displayed.
* Only for DDX6016BT/DDX6016BTM/DDX616WBT/DDX616WBTM.
Setting the security function
❏ Registering a security code
You can set a security code to protect your receiver
system against theft.
1
Display the Home screen.
On the monitor panel:
DDX6016BT/DDX6016BTM
DDX4016BT/DDX416BT/
DDX416BTM/DDX316/
DDX316M
DDX616WBT/DDX616WBTM
2
Display the <System> setting screen.
3
Display the <Security Code Set> screen.
• Press [
] repeatedly to change the page on
the <System> menu screen.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.
4
Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
• Press [
] to return to the current source
control screen.